Advertisement
Vandal Shield: Fig. 3
1. Fill up the notched areas between glass and door frame with RTV silicone as shown.
2. Attach four clips between glass and door frame at notched area in frame as shown, ensure clip presses into
silicone.
3. Remove protective covering from shield and assemble to clips with four screws provided.
Wireguard: Fig. 4
1. Fill up the notched areas between glass and door frame with RTV silicone as shown.
2. Attach four clips between glass and door frame at notched area in frame as shown, ensure clip presses into
silicone.
3. Assemble wire guard to clips with the four screws provided.
© 2016 Philips Lighting Holding B.V. All rights reserved.
www.philips.com/luminaires
443561063590 Rev. C
Page 2 of 2
INSTALLATION INSTRUCTIONS
PentaFlood – Accessories
Philips Lighting North America
Corporation
200 Franklin Square Drive,
Somerset, NJ 08873, USA
Philips Lighting Canada Ltd.
281 Hillmount Road,
Markham ON, Canada L6C 2S3
Advertisement
