Download Print this page

Home Fashions U Roman Shade Installation Instructions page 2

Screw eye lifting system

Advertisement

Here are some helpful tips:
 If you are using a special fastener, make sure it is designed to
support the weight of the shade. Follow the fastener
manufacturer's instructions carefully.
 When drilling into drywall or plaster, use a fastener
designed for hollow wall applications (see illustration).
 When drilling into concrete, stone, brick, or tile, use
appropriate plugs, anchors, or screws (not included).
 When drilling into metal, the included screws are sufficient,
but it is best to pre-drill the holes.
Mounting the Shade
Inside Mount
Step 1: Mark the Mounting Holes
Position the shade as you want it to hang in the window,
with the front of the shade facing into the room. Center the
shade inside the window frame at the required depth.
Using an awl, mark the locations of the mounting holes through
the pre-drilled headrail holes.
Remove the shade.
C e n t e r
Drilled Holes
Step 2: Drill the Mounting Holes
Note
: Be sure about the desired position of the shade before
drilling the mounting holes.
Using a
1
" drill bit, drill pilot holes at the locations marked in
⁄16
Step 1.
Step 3: Mount the Shade
Place the shade in the position you selected in Step 1.
Align the shade with the drilled holes and make sure the
draw cords are free.
Install the shade using the 2" screws provided.
Step 4: Attach the Cord Cleat
For the cord cleat, choose a location that is close to the
shade, and a height that will be safe for children. Attach
the cord cleat to the wall using the two color -matched
screws provided.

Advertisement

loading