Component List; Technical Data - Worx WX822L Instruction Manual

COMPONENT LIST

1.
ON/OFF SWITCH
2. HANDLE
3.
BATTERY PACK RELEASE BUTTON
4. BATTERY PACK
5. DUST BAG
6.
DETAIL PLATE
7. FINGER PLATE
8.
5-1/2" X 3 1/2" DETAIL H&L SANDING
PAPER*
9.
3" X 1-13/64" FINGER H&L SANDING
PAPER*
*Not all the accessories illustrated or
described are included in standard delivery.

TECHNICAL DATA

Type Designation WX822L WX822L.9 (82 -
designation of machinery, representative of
Sander)
WX822L
Voltage
No-load speed
Plate size
Orbital diameter
2.65 lbs
Machine weight
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
20V Cordless Detail Sander
WX822L.9
20 V Max**
12000 /min
5 1/2" x 3 1/2"
5/64"
1.77 lbs
ACCESSORIES
Battery pack (WA3525)
Charger (WA3881)
5-1/2" x 3 1/2"Detail H&L
Sanding Paper
3" x 1-13/64" Finger H&L
Sanding Paper
Dust Bag
Finger Plate
Only use the appropriate accessories intended for this
tool. Accessory information can be found on the product
packaging, at a WORX dealer or on our website at www.
worx.com.
We recommend that you purchase your accessories
listed in the above list from the same store that sold you
the tool. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
WX822L WX822L.9
1 /
1 /
3 3
3 3
1 1
1 1
EN
7