Connecting A Cable Converter Box; Connecting A Cable Converter Box And A Vcr - Toshiba 50A10 Owner's Manual

Connecting a cable converter box

This connection allows you to watch cable and premium channels.
You should place the A/B switch in the "A"position so that you can
use the TV's features. When viewing premium channels, switch to "B"
and tune the TV to channel 3 or 4 (whichever channel is vacant in
your area), then use the converter box to change channels.
You will need:
• one two-way signal splitter
• one A/B switch
• four coaxial cables
From
Cable
2-way
signal
splitter
(Not supplied)
IN OUT
Cable converter box

Connecting a cable converter box and a VCR

This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. You should keep your TV
selected to TV so that you can use the TV's features. When viewing
premium channels or recording with the VCR, select Video 1 (see
page 33), turn on the VCR, set the VCR channel to 3 or 4 (whichever
channel is vacant in your area), then use the cable converter box to
change channels. To watch a basic cable channel while recording with
the VCR, the TV should be left in TV mode.
You will need:
• one two-way splitter
• three coaxial cables
• one pair of audio cables (only one cable for a mono VCR)
• one video cable
TV
S-VIDEO
VIDEO
L/ MONO
AUDIO
R
COLOR
VIDEO 1 VIDEO 2
IN
L R
L R
VIDEO
AUDIO
Stereo VCR
6
A/B switch
(Not supplied)
A
IN OUT
B
S-VIDEO
Y
VIDEO
L/ MONO C
AUDIO
C
R
COLOR
STREAM
VIDEO 1 VIDEO 2
INPUT
IN DVD IN
AUDIO CENTER
CHANNEL IN
(Not supplied)
ANT( 75 )
ON OFF
OUT
VAR
R L
AUDIO
IN
Y VIDEO
OUT
L/
L
C
B MONO
AUDIO AUDIO
C
R
R R
STREAM
INPUT
DVD IN OUT
IN
OUT to TV
IN from ANT
OUT
CH 3
CH 4
TV
Note:
AUDIO CENTER
CHANNEL IN
When you use a converter box with your TV,
there may be features that you cannot
)
ANT( 75
ON OFF
program using the remote control, such as
OUT
VAR
R L
AUDIO
programming your favorite channels, labeling
channels, and locking channels.
VIDEO
L/
L
B MONO
AUDIO AUDIO
R
R R
OUT
Caution:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
From
If you have an S-VHS VCR, use the S-video
2-way Cable
connections and omit the video cable. Do not
signal
connect the video cable and the S-video
splitter
cable to Video-1 simultaneously.
When you use a converter box with your TV,
there may be features that you cannot
program using the remote control, such as
programming your favorite channels, labeling
channels, and locking channels.
Cable converter box