Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for ACTi R61C-30
- Page 1 Quick Installation Guide R61C-30 R61C-10 V180521...
- Page 2 Device Overview Speaker Microphone Ethernet Port Camera Lens DC 12V Input IR LEDs Digital Input / Output RFID Card Reader Wiegand connection Push Button (available only on R61C-10) LED Indicators Green: Power and Network status Red: Ring and Call status This guide contains the basic information you need to quickly setup the Device.
- Page 3 Step 1: Unpack the Device Check the package and make sure all items are present. • Device • RFID card (1) • DI/DO cable • Fixing screw Step 2: Mount the Device Housing 1. Select a location and drill a rectangular hole with dimensions 80 x 140 mm on the wall.
- Page 4 Step 3: Connect the Cables Network Door Control Power Source Door Lock Push Button Alarm 1. Connect the Ethernet cable to the Device. If using a non-PoE switch, connect a power adapter (sold separately). 2. Wire and connect input / output devices to the bundled DI/DO cable connector.
- Page 5 For full documentation, please refer to the User Manual downloadable from the website. ACTi Connecting Vision and its logo are registered trademarks of ACTi Corporation. All other products or company names mentioned in this document are trademarks or registered trademarks of their respective owners.
Need help?
Do you have a question about the R61C-30 and is the answer not in the manual?
Questions and answers