Midway MCR Switching Power Supply Adapter Manual

Table of Contents

Download this manual

MCR Switching Power Supply Adapter

Although this upgrade has been tested and the techniques used will not directly cause harm to your

game. If you do something wrong, you can very seriously damage the electronics! So...

...Please read the instructions.

To perform this upgrade, you should:

•

Have a working understanding of electronics.

Page: 1

MCR Power Adapter Instructions - Rev. 1.3

, Arcadeshop, LLC

Table of Contents

Need help?

Do you have a question about the MCR Switching Power Supply Adapter and is the answer not in the manual?

Page 1 MCR Switching Power Supply Adapter Copyright 2009-2019 Arcadeshop, LLC - all rights reserved. Although this upgrade has been tested and the techniques used will not directly cause harm to your game. If you do something wrong, you can very seriously damage the electronics! So...
Page 2 • Be familiar with safe handling procedures for electronic components. • Have basic soldering and electronic assembly skills. • Can follow directions. Anytime you start messing around with something (particularly something electronic) you accept a certain amount of risk that you may break something. This kit carries with it no guaranty of compatibility to your game.
Page 3 There are 4 plugs on the board. Simply unplug the connectors, unscrew the top plastic retainer and slide the board out. Step Three: Connecting the MCR Switching Power Supply Adapter: Option A – Connecting the Adapter directly to the 15 AMP Power Supply: 1.
Page 4 -OR- Option B – Connecting the Adapter directly to the Heavy Duty Power Supply: 1. Plug in J4, J5 and J6 connectors. (One of the connectors will not be used) 2. Secure the adapter to the Silver power supply using connector PS2 on the Adapter. 3.
Page 5 That’s it, time to play… Notes: With the power supply being the #1 problem with Midway MCR games, the second most widespread problem... MCR Ribbon cables! Over time they begin to fall apart and cause problems.