WATCH WITH RECHARGEABLE LED CREE FLASHLIGHT 3W
BK495
PRODUCT DESCRIPTION
FIG. 1
*
Both buttons have the same function which allows to select the 5 lighting modes ( high,
medium, low, SOS flashing and strobe).
Included accessories: 1 x Adapter
HOW TO WEAR THE WATCH ?
The watch should be worn as shown in figure 2 in the opposite.
It could be worn either on the right or on the left wrist.
- The flashlight should not be directed towards oneself.
- DO NOT AIM the light beam directly to the eyes.
- If it is worn on the right wrist, the time can be read correctly. If you
put it on the right wrist, the time will be displayed upside down.
- The watch can also be used as extra lighting when placed on a table.
TECHNICAL CHARACTERISTICS
Power supply: 1 x rechargeable lithium-polymer button cell 600mAh, 3.7V (for LED flashlight)
1 x SR626 button cell battery for digital display
Adapter features :
100-240V~ ~ ~ ~ 50/60HZ
5V
, 2A
LED: 1 LED CREE XPE, 3W
Light output: 250 lumens (high intensity), 180 lumens (medium intensity) and 100 lumens (low intensity)
CHARGING THE BATTERY
When the charging light indicator become green, it means that the battery is fully charged.
Please refer to the table below for the status of the indicator light.
Colour of indicator
light
Red
Green
Flashing red
INSTRUCTION MANUAL
Note :
Status
Ongoing charging
Complete charge (full charge)
Batterie faible Low battery
1.
Button to turn on, choose among the 5
2.
Display screen
3. Port to connect the charger (included) or the
the USB cable (not included)
4.
Button to display time, date and seconds
5.
LED Flashlight
6.
Button to set the time and date
7.
Charging indicator light
*
Need help?
Do you have a question about the BK495 and is the answer not in the manual?
Questions and answers