Fauna Memor Havana Quick User Manual

Quick User Guide
Welcome to Fauna – your audio glasses!
Fauna overview
TOUCH CO NTRO L WOO FER
R I G HT TEM PLE
2 M I CRO PH O N ES
USOU N D M EM S
S PE A KER
First steps
Activate
Prior to first use, peel the plastic
protector off the charging contacts
and place the glasses back in the case.
Once the contacts are successfully
connected, the LED "glasses status"
will light up. Close the case and reopen
it. Fauna has now been activated and
you will hear: "Hi! Fauna is on". Once
activated, Fauna is always ready to use.
Using Fauna
Double tap
Accept call
End call
Play music
Pause music
Slide forward
Volume down
More about your Fauna
Important information
The pairing with a device can be forced:
tap and hold on the right temple, then
connect the output device to Fauna via
Bluetooth.
Fauna is only splash-proof. Please do not
keep it under running water.
Adjustments of frame, length of the temple
and lenses can be made by an optician.
Please leave this to a professional.
Fauna can only be recharged in the case.
Please do not charge any other way.
Instructions for opticians
Please follow these
instructions to avoid
any damage.
Cut off the description and take it with you to the glasses
adjustment. Fauna is suitable for prescription lenses.
USOU N D M EM S
S PE A KER
WOO FER
TOUCH CO NTRO L
LEF T TEM PLE
CH A RG I N G
CO NTACTS
Connect
Place the glasses in the case and
close the lid. Open the lid again, acti-
vate Bluetooth on your mobile device
and search for Fauna. The connection
is confirmed with "Great, Fauna is
connected." If you hear "Please try
pairing again," repeat the procedure.
With known devices, Fauna connects
automatically.
L E F T
T E M P L E
Tap & hold
Decline call
Skip to next song
Slide back
Volume up
Charging the glasses
The "glasses status" LED in the Fauna
case indicates the status of the glasses.
This LED flashes yellow (low charge
level) or green (charge level above 30 %)
if the contacts are connected properly.
At 100 % charge, the LED glows green
for 10 seconds after opening the case.
Charging the case
The 4 LEDs on the outside show the
battery status of the Fauna case. When
the case is charged via USB-C cable,
they will flash. If they glow continuously,
the Fauna case is completely charged.
1 LED :
G L AS S ES STAT US
CH A RG I N G US B- C
CO NTACTS CO N N ECTI O N
CAS E STAT US
Charge
If the battery charge is below 30 %, Fauna warns
you: "Battery low, please charge your Fauna". To
charge your Fauna, put it in the case making sure
that the pins are connected. Close the lid to start
the charging process. To indicate your Fauna is
connected correctly, after closing the case, the
left-most and right-most of the 4 "case status"
LEDs will light up for 5 seconds. The Fauna case
serves as charging station.
R I G H T
T E M P L E
Double tap
Active voice
assistant
Tap & hold
Force pairing
LED
glasses status
less than 30 %:
flashes yellow
less than 100 %:
flashes green
100 % charged:
lights up green 10 sec.
Find more information and a detailed
manual in different languages at:
www.wearfauna.com/manual
Attention:
Fauna contains electronics.
wearfauna.com
Download the "Fauna" app now.
CH A RG I N G
CO NTACTS
4 LEDS :
For more control
options, download
the "Fauna" app.
LED
case status
less than 25 %
less than 50 %
less than 75 %
100 % charged