Crunch CRB Series Manual
Crunch CRB Series Manual

Crunch CRB Series Manual

Single bandpass system
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

CRB501
SINGLE BANDP ASS SYSTEM

Advertisement

Table of Contents
loading

Summary of Contents for Crunch CRB Series

  • Page 1 CRB501 SINGLE BANDP ASS SYSTEM...
  • Page 2: Technische Daten

    DEUTSCH TECHNISCHE DATEN Crunch CRB501 Single-Bandpass-System Subwoofer: 30 cm (12“) 64 mm (2.5“) Schwingspule Dual-Magnet mit 2,26 kg (80 oz) Aluminium-Gusskorb Belastbarkeit RMS: 500 Watt Belastbarkeit Max. 1000 Watt Impedanz: 4 Ohm SPL: Bis zu 144 dB Abmessungen B x H x T:...
  • Page 3 Stromversorgung der LED-Beleuchtung. BELASTBARKEIT Die CRUNCH CRB Gehäuse-Subwoofer sind auf sehr laute Basspegel ausgelegt. Dennoch ist bei einer zu niedrigen oder zu hohen Verstärkerleistung kein zufriedenstellendes Klangbild erreichbar. Dies kann unter Umständen sogar zu einer Beschädigung der Lautsprecher führen.
  • Page 4 DEUTSCH ANSCHLUSSBEISPIELE ACHTUNG: Achten Sie bei dem Anschluss der Kabel unbedingt auf die korrekte Polung. 1.) BETRIEB MIT EINEM 2-KANAL VERSTÄRKER (gebrückt) gebrückt Kanal 1 Kanal 2 4 Ohm, 175 - 300 Watt 4 Ohm, 175 - 300 Watt 2.) BETRIEB MIT EINEM MONO VERSTÄRKER 4 Ohm, 350 - 600 Watt...
  • Page 5: Specifications

    ENGLISH SPECIFICATIONS Crunch CRB501 Single Bandpass System Subwoofer: 30 cm (12“) 64 mm (2.5“) Voice Coil Dual Magnet with 2,26 kg (80 oz) Aluminum Die-Cast Basket Power Rating RMS: 500 Watts Power Rating Max. 1000 Watt Impedance: 4 Ohms SPL:...
  • Page 6: Led-Illumination

    LED-illumination. POWER RATINGS The CRUNCH CRB subwoofer enclosures are designed for high bass levels. Anyhow it is possible, that unsatisfying sound characteristics could be caused by too low or too high amplifier power. In certain circumstances this even can cause a damage to the loudspeakers.
  • Page 7: Interconnection Examples

    ENGLISH INTERCONNECTION EXAMPLES NOTE: Please ensure that the connection of the cables have the correct polarity as marked. 1.) OPERATION WITH ONE 2-CHANNEL AMPLIFIER BRIDGED bridged Channel 1 Channel 2 4 Ohms, 175 - 300 Watts 4 Ohms, 175 - 300 Watts 2.) OPERATION WITH ONE MONO AMPLIFIER 4 Ohms, 350 - 600 Watts...
  • Page 8 CRB501 SINGLE BANDP ASS SYSTEM Audio Design GmbH Am Breilingsweg 3 · D-76709 Kronau/Germany Tel. +49 7253 - 9465-0 · Fax +49 7253 - 946510 www.audiodesign.de © 2017 Audio Design GmbH, All Rights Reserved...

This manual is also suitable for:

Crb501

Table of Contents