Related Manuals for BUMBER PANBB305-034 CHARLOTTE
Summary of Contents for BUMBER PANBB305-034 CHARLOTTE
- Page 1 INSTRUCTIONS’ MANUAL PANBB305-034 CHARLOTTE READ THIS MANUAL BEFORE USE 02/07/2019...
-
Page 2: Commercial Warranty
Commercial Warranty Bought on Resellers’ websites www.bumber.fr 2 years 1 year from date of delivery CUSTOMER SERVICE BUMBER 22 rue de l’Industrie ZI des Joncaux 64700 Hendaye France From Monday to Friday + 33 (0)9.74.59.42.65 contact@bumber.fr... - Page 3 INVENTORY Base with wheels and cap 1. and 2. 1 + 2 + 1 (11. drawing) Wheel shaft Lower pole Screw Hoop + Net x1+1 Panel Nut Safety washer Joint Nut washers Screw Support rod Support rod Screw Nut washer Nut Middle pole Locking screw Locking screw Upper pole Screw Nut Nut washer Nut Panel fixing rod Panel fixing rod Nut washer Screw Nut washer NOT SUPPLIED BUT NECESSARY...
-
Page 4: Usage Tips
ENGLISH USAGE TIPS • Do not hang on the hoop: risk of serious injury or death. • Secure the basket before use. • Minimum height of use: 1,98 m (6 '6' ') to the panel. • For domestic use: any commercial use is forbidden. • Restrictions of use: Not recommended for pregnant women, people with heart problems, children under 14, unattended minors. • SAFETY INSTRUCTIONS • Assembly: 2 adults • Check for leaks when filling the base • DO NOT HANG on the hoop or other part of the system, including the panel, brackets or net. • Before the game, remove your jewellery (rings, watches, necklaces, etc.). These objects can get caught on the net. • The surface under the net must be empty, clean, smooth, without gravel or other bulky and sharp objects. • Check the system before each use (loose screws, excessive wear and signs of corrosion) and repair before use. • Check the stability of the system before each use. • Fixed and complete assembly/ use/ supervision are essential for proper operation and for reducing the risk of accident or injury. Serious injury is very likely to happen if the system is not installed, maintained and used properly. • This system is for recreational use and not for excessive competition games. -
Page 5: Maintenance
ENGLISH TRANSPORT • Parcel damaged during delivery If your product has a problem linked to the transport and that you have expressed some reservations about the state of your product and not just the packaging and haven’t signed the delivery slip, please send justifying photos and product invoice to contact@bumber.fr under 72 working hours. However, if you have accepted the parcel without checking the product inside and without expressing reservations: we deny all responsibility in the matter. • Intact packaging but the product has a problem not linked to the transport or missing parts. Please send justifying photos and product invoice to contact@bumber.fr under 72 working hours and don’t sign the delivery slip. - Page 6 ENGLISH ASSEMBLY OF BASKETball stand When assembling your portable basketball net, you will need to follow these steps: Mounting the base and the lower pole: Remove and insert the wheel shaft 3. into the holes of the front of the base 2. Attach one of the 2 ends of the support rods 14. and 15. at the base with the bolts (two screws 13., a safety washer 9., two nut washers 12. and a nut 8.). Then aim the other two ends of the support rods 14. and 15. on the outer pole 4. using the screw 16., nut washer 17. and nut 18. Assembly of the basketball hoop/net, panel and upper pole: Assemble the basketball net 6. (hoop + net), panel 7. and upper poLe 22. using screw 5., nut 24. and nut washer 32. Mounting of the panel fixing rods: Hook the fixing rods 27., 28. and 29. on the top of the upper pole 22. with screws 23. and 31., the nut washers 25. and 30. and the nut 26. Assembly of the middle pole to the outer pole: Insert the middle pole 19. into the outer pole 4. using the locking screw 20. to block the system. Assembly of the middle pole to the upper pole: Insert the upper pole 22. into the middle pole 19. The height is adjustable as needed. To lock the system, use the locking screw 21. Fill the base with water and / or sand, insert the seal 10. into the hole and close with the plastic plug 11.
-
Page 7: Assembly Illustrations
ASSEMBLY illustrations...