Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for CenturionPro HP1
Summary of Contents for CenturionPro HP1
- Page 1 OWNERS MANUAL BUCKERS: HP1, HP3...
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION CENTURION PRO SOLUTIONS: HP BUCKERS The HP Buckers are high-powered machines that require special safety precautions to be practiced while in operation to reduce the risk of personal injury. Improper use of the HP Bucker may cause serious or fatal injury. Please read the precautions and warning labels before using the HP Bucker DO NOT LEND OUT OR RENT YOUR HP BUCKER WITHOUT THIS OPERATING MANUAL. - Page 3 TABLE OF CONTENTS IMPORTANT SAFETY INFORMATION TABLE OF CONTENTS COMPONENT OVERVIEW CONTROL PANEL / EMERGENCY STOP OVERVIEW CLEANING MAINTENANCE ASSEMBLY TO STAND - HP1 & HP3 GENERAL OPERATIONS GENERAL PERFORMANCE SPECIFICATIONS HP1 GENERAL PERFORMANCE SPECIFICATIONS HP3 TROUBLE SHOOTING FREQUENTLY ASKED QUESTIONS...
-
Page 4: Component Overview
COMPONENT OVERVIEW CP-7035 BACK COVER TOP CP-7042 CP-7043 CP-7041 EMERGENCY SET SCREW & SEW CONTROLLER STOP BUTTON WINGNUT MOVITRAC CP-7039 CP-7032 MOUNT PLATE SPRING CAP CP-7033 COMPRESSION SPRING CP-7031 GEAR COVER CP-7037 SPUR GEAR NO HUB CP-7044 CP-7036 SEW EURO DRIVE SPUR GEAR MOTOR CP-7038... -
Page 5: Control Panel Overview
OWNERS MANUAL HIGH PERFORMANCE - HP BUCKERS CONTROL PANEL OVERVIEW SPEED DIAL START BUTTON 6-DIGIT DISPLAY NAVIGATE BUTTON FORWARD OR UP BUTTON REVERSE SWITCH DOWN BUTTON STOP / RESET BUTTON POWER SWITCH: ON / OFF EMERGENCY STOP BUTTON OVERVIEW EMERGENCY STOP BUTTON Located on top of HP Bucker For more information or to watch our video tutorials visit cprosolutions.com... -
Page 6: Cleaning And Maintenance
CLEANING & MAINTENANCE CLEANING & MAINTENANCE *Ensure machine is unplugged before cleaning. STEP 1: STEP 2: STEP 3: REMOVE REMOVE FRONT CLEAN BOTH FRONT PLATE CUT PLATE ROLLERS WITH CLOTH A) Remove using: A) Remove using: 8 - 3/16" x 1" bolts 2 - 3/16"... - Page 7 MOUNT BUCKER LEGS ONTO STAND Unscrew legs from A) Line up existing holes of the Bucker (HP1 only). bucker to the holes on the stand plate. Attach using: 6 - 3/16" hex top 1/4"-20 x 1.25" bolts Repeat 3x for the Triple Stand...
-
Page 8: General Operations
GENERAL OPERATIONS PREPPING YOUR PLANT: MATERIALS NEEDED 2 STEPS FOR OPTIMAL PROCESSING • Tool kit provided with Bucker 1) ENVIRONMENT PREPARATION • Brush / Plastic scraper • Spray bottle filled with isopropyl alcohol • Ensure adequate space • Soft cloths •... - Page 9 OWNERS MANUAL HIGH POWER - HP BUCKERS HP1 BUCKER SPECIFICATIONS HP1 BUCKER HP1 BUCKER FEATURES NA: 120V, 60 Hz Single Phase Input Voltage Feed Throughput +175 lbs/hr (Hydrated) EU, AUS: 240V/50HZ, Single Phase Current Draw < 2.5A Operating Feed Entry Sizes 5-hole (3/16”, 1/4”, 3/8", 1/2”, 3/4”)
-
Page 10: Troubleshooting
Our machines can be taken apart and cleaned within 10-15 minutes. The Bucker must be cleaned Use your CenturionPro Bucker in 50-60 °F (10- 15 °C) room to get the best performance. after daily use. Just spray the rollers liberally with isopropyl alcohol, then wipe with a soft cloth. We Cooler temperatures prevent excessive sticking to machine components. -
Page 11: Warranty Terms And Conditions
CenturionPro Bucker machines are intended for use on legal aromatic herbs and hops. Please check all municipal, provincial/state and federal laws and regulations before using these machines. CenturionPro Solutions does not promote or condone the use of these products in any way that may be deemed illegal. - Page 12 cprosolutions.com 1 855 535 0558 info@cprosolutions.com FOLLOW US ON:...