Related Manuals for Arcadia SERIES 6 AH30M
Summary of Contents for Arcadia SERIES 6 AH30M
- Page 1 AQUAR I UM L ED SAFETY, INSTALLATION AND MAINTENANCE INSTRUCTIONS FULL ONLINE INSTRUCTIONS: www.arcadia.systems...
-
Page 2: Read And Follow All Safety Instructions
The ‘drip loop’ is that part of the cord below the level of the socket, or connector, which prevents water travelling along the cord to the socket. Illustration 1. 10. Do not use the appliance other than for its intended use. The use of non-Arcadia attachment or accessories is not recommended and may cause an unsafe condition. - Page 3 LED SPECIFICATIONS - MARINE AH30M AH45M AH60M AH90M AH120M MARINE AH30M AH45M AH60M AH90M AH120M Channel Specification CREE WHITE XTE 7000-8300K 5W CREE ROYAL BLUE XTE 450-460nm 5W CREE BLUE XPE 465-485nm 3W UV 400-410nm 3W VIOLET 420-430nm 3W CREE RED XPE 620-630nm 3W CREE GREEN XPE 520-535nm 3W...
- Page 4 LED SPECIFICATIONS - FRESHWATER AH30F AH45F AH60F AH90F AH120F FRESHWATER AH30F AH45F AH60F AH90F AH120F Channel Specification CREE WHITE XTE 7000-8300K 5W CREE WHITE 4500-5500K 3W CREE BLUE XTE 465-485NM 3W CREE RED XPE 620-630NM 3W CREE ROYAL BLUE XTE 450-460NM 5W CREE GREEN XPE 520-535NM 3W...
-
Page 5: Physical Installation
PHYSICAL INSTALLATION 1. Series 6 LED 4 Support rods 2. Screw set 5. Support brackets 3. Suspension wire 6. Power adapter Select a suitable site close to your electricity supply. Do not connect appliance to the mains supply socket during installation. This appliance is for indoor use only. -
Page 6: Troubleshooting
The screen Bad connection between unit and power supply. Check connector. doesn’t display Machine fault. Contact Arcadia. There is foreign material on the buttons panel. Remove the foreign material and keep the panel clean. Buttons failure Machine fault. Contact Arcadia. -
Page 7: Download Application
DOWNLOAD APPLICATION Connect Manual Go to connect screen Allows user to set light level for each channel to compare Press Change Wi-Fi to find colour combinations and device light levels. Unit returns to programmed setting on exit Click on device (number as label on end of unit) Tap channel to be changed and use slider to set level... -
Page 8: Led Replacement
LED REPLACEMENT Ensure unit is disconnected from the mains before starting. Risk of electric shock or damage to LEDs if the unit is worked on while connected to the mains. Remove the cover plate and end plates. Remove lens. Remove LED to be changed. Plug in new LED. -
Page 9: Maintenance
AHL120 S6 120 degree lens 844046013446 For a list of spare items available, please refer to the Arcadia Products website for the most up to date information. www.arcadia-sales.com MAINTENANCE Caution! Disconnect all appliances in the aquarium from the mains supply before putting your hands in the water or maintaining the Luminaire.
Need help?
Do you have a question about the SERIES 6 AH30M and is the answer not in the manual?
Questions and answers