Page 2
INSTALLATION INSTRUCTIONS WHITE 8000 BEFORE YOU BEGIN... STEP 1 STEP 2 HELPFUL TOOLS REMOVE CLOSING SYSTEM INSTALL MAIN BANDIT FRAME Hammer/Mallet Remove (1) 16mm bolt 1, (3) 12 mm bolts 2 and stop bolt Slide the main BANDIT frame 4 in where the closing 3 to uninstall the closing system from the row unit.
Page 3
INSTALLATION INSTRUCTIONS WHITE 8000 STEP 3 STEP 4 STEP 5 INSTALL SUPPORT STRAP RE-INSTALL CLOSING SYSTEM PREPARE HOSE GUIDES Place the support strap 5 on top the main BANDIT frame Attach the spring 9 from the OEM closing system to the Using side-cutters, cut the two hose guides apart aligning the two holes in the strap with the two holes in the hook...
Page 4
Slide bolt of the disk assembly into the lower hole on the Attach the plumbing assembly to each of the hoses coming (not included) in the plumbing to each row prior to the 360 BANDIT , aligning the ear tab...