Related Manuals for Babybee Orbit Board v2
Summary of Contents for Babybee Orbit Board v2
- Page 1 Orbit Board v ride on buggyboard www. babybeeprams.com.au Please keep this manual for future reference...
- Page 2 Hello! Thanks for choosing the babybee Orbit Board v . Before you get started, there’s a few quick things we’d like you to note: Warranty Support The Orbit Board includes a If at any stage you require any 12 month warranty, to cover...
-
Page 3: Safety First
Do not use unauthorized Orbit Board in use. spare parts. To prevent injury from... -
Page 4: What's In The Box
What’s in the box Board (including x 2 attachment clamps) Removable seat Wheels x 2... -
Page 5: Install The Wheels
Step One Install the wheels Insert each wheel pin into the wheel hub located on the underside of the board. You should hear an audible “click”. Give each wheel a good tug to ensure it’s securely in place. Wheel removal To remove the wheels, simply press the button located on the underside of... - Page 6 Step Two Connect the Orbit Board to your pram Thread the plastic corrugated straps around each side of the frame and into the side clasp. You’ll hear it as it fastens. Pull tight to ensure the Orbit Board stays firmly in place while in use.
- Page 7 Step Three Adjusting the arm length If you need to adjust the arm length, simply press and hold the lever on the side of the arm and extend or retract it to your required length.
- Page 8 Step Four Adjust the board angle To adjust the angle of the board, twist the two knobs located at the front of the board in the direction of the “unlock” symbols. Keep twisting until the arms move freely. Angle the board so that the brake can be used freely without obstruction and so that the board is as flat as...
- Page 9 Step Five Seat installation (optional) If you wish to use the seat, insert the seat tube into the seat hub, located on the topside of the board, until you hear an audible “click”. Pull on the seat to ensure it is firmly connected.
-
Page 10: Seat Height Adjustment
Step Six Seat height adjustment If you need to adjust the seat height, press down on the button located underneath the seat, and rotate the seat forward. Once the seat has been rotated forward, the seat tube can be lengthened or shortened depending on the height of your child simply by sliding it to the... - Page 11 Maintence Guide Your Orbit Board has many - Please be aware that weather moveable parts, therefore conditions such as humidity, friction will occur and over time snow, and beach use will also it may become scratched, rusty affect the product’s exterior. or dusty.
- Page 12 Contact hello@babybeeprams.com.au babybee prams @babybeeprams Version: September 2017 Information is correct at time of printing yet subject to change. Please download the current manual from our website. www.babybeeprams.com.au...
Need help?
Do you have a question about the Orbit Board v2 and is the answer not in the manual?
Questions and answers