Summary of Contents for dB HS-80
- Page 1 Operating / Instruction Manual www.micro-seiki.nl information@micro-seiki.nl...
- Page 2 HS-80 HS-80. General. All dimensions and weight are exactly copied from the original. Despite a packing-control of all parts, you are seriously suggested if all parts are present and show no damages. Otherwise you should contact me immediately at: information@micro-seiki.nl Advise: for dry maintenance use only an abrasive cloth and for a wet maintenance use a barn free damp cloth.
- Page 3 HS-80 Instructions. ATTENTION! THIS UNIT IS VERY, VERY HEAVY. MORE THAN 15 KGS! Please inspect box if it is not damaged, This unit is packed in a box within a box, The unit is packed in the second box, ...
- Page 4 HS-80 Placing the base of the Flywheel? The base must be placed horizontal. This must be done using the three adjustable feet. Where do I place the base of the Flywheel? The distance to the turntable depends on the length of the string. The length of the string must be the same as the string length used to the motor unit.
- Page 5 Platter is too low. Using the HS-80 with the RY5500, you need to lift it up by 7-10mm in order to get the right height so that you can put the thread in the middle of the shaft (not the top one used without flywheel), otherwise you won’t get the right speed.
Need help?
Do you have a question about the HS-80 and is the answer not in the manual?
Questions and answers