Table of Contents
Advertisement
Quick Links
INSTALLATION INSTRUCTION
BEFORE YOU START, HERE IS SOME IMPORTANT INFORMATION.
DANGER: Before installation, make sure
the
main power is cut off.
IMPORTANT
● This product contains glass parts. Take care while fitting or handling
to prevent personal injury or damage to the product; If the glass is
broken, please stop using it and replace it from agent or manufacturer.
● Ensure the mounting surface is dry and strong enough to bear four
times the weight of the product for the safe fitting.
● Special care should be taken when drilling walls to avoid hidden
pipes or electrical cables.
● The product covers the outlet box and the wirings after installation.
Description
Tape Measure
Spirit Level
Pencil
MAINTENANCE
● Wipe clean with a soft, dry cloth. Never use abrasives or chemical
cleaners.
● Please put a soft cushion under the mirror while you take the mirror
down from the wall.
SARINEnergy.com
TOOLS REQUIRED
Parts Image
Description
Drill
Cross Head
Screwdriver
Hammer
INSTALLATION INSTRUCTIONS
LED Mirror - ML01
WARNING: Installation must be performed
by a qualified licensed electrician.
Parts Image
855-997-2746 | LED@SARINEnergy.com | 1
IN
S
C
S
P
U
s
S
D
S
A
S
S
P
p
Advertisement
Table of Contents
Summary of Contents for Sarin Energy ML01
- Page 1 INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTION LED Mirror - ML01 BEFORE YOU START, HERE IS SOME IMPORTANT INFORMATION. WARNING: Installation must be performed DANGER: Before installation, make sure by a qualified licensed electrician. main power is cut off. IMPORTANT ● This product contains glass parts. Take care while fitting or handling to prevent personal injury or damage to the product;...
- Page 2 INSTALLATION INSTRUCTIONS LED Mirror - ML01 INSTALLATION STEPS STEP 1 CUT OFF THE MAIN POWER SUPPLY. STEP 2 Place the metal 'Z' bar against the wall and use a level to make sure that it is level. Use a pencil to mark the position of the screw holes. Note: The part of the 'Z' bar sticking out from the wall will be on top when installed.
Need help?
Do you have a question about the ML01 and is the answer not in the manual?
Questions and answers