Download Print this page

Merritt Buckle Guard Installation Manual

Hide thumbs

NOTE: This buckle guard is

designed to prevent the

occupant from releasing the

buckle.

NOTE: Do not use this

product if caregiver is

unable to release the buckle

with the buckle guard

installed.

NOTE: This buckle guard

(Figure A) must only be

used with the buckle shown

in Figure B. If there is any

doubt, call customer service

at Merritt Manufacturing,

Inc. at 317-409-0148 for

assistance.

1. Remove the buckle from

your child safety seat, per

the instructions provided

with it.

2. Remove the Buckle Guard

(Figure D) from its

packaging.

3. Insert the buckle anchor

through the top of the

Buckle Guard (Figures E and

F).

4. Using the palm of your hand,

snap the Buckle Guard onto

the buckle (Figure G).

NOTE: Make sure the

buckle guard fits flush as

shown in Figures H and I. If

it does not fit flush, call

customer service at Merritt

Manufacturing, Inc. at 317-

409-0148 for assistance.

5. Install the buckle, according

to your child safety seat's

instructions.

6. Instructions continued on

back of page.

Installation of the Buckle Guard

NOTE: This Buckle Guard (Figure A) will not work with any

of the buckles pictured above. It will only work with the

buckle shown in Figure B below.

Buckle

Anchor

Table of Contents

Need help?

Do you have a question about the Buckle Guard and is the answer not in the manual?

Questions and answers

Summary of Contents for Merritt Buckle Guard

Page 1 NOTE: Do not use this NOTE: This Buckle Guard (Figure A) will not work with any product if caregiver is of the buckles pictured above. It will only work with the unable to release the buckle buckle shown in Figure B below.
Page 2 (Figure J). 2. Or, while lifting up on the front of the buckle guard with one hand, insert the end of the tool provided through the hole on the front of the buckle guard and use it to press the red release button on the buckle (Figures K and L).