Connecting The Sensor Evaluation Board To Arduino; Connecting Arduino To Your Pc - Omron 2JCIE-EV01-AR1 User Manual

3-3 Connecting the Sensor Evaluation Board to Arduino

Insert the pin header on the Sensor Evaluation Board into the Arduino pin socket. The Sensor
Evaluation Board is on top and Arduino is on the bottom.
Fig. 4 Connecting to Arduino
Note:
The temperature sensor on the Sensor Evaluation Board may output a high value due to heat from the
Arduino unit. To eliminate this effect, either connect with a cable to separate the two, or use an
externally connected temperature/humidity sensor.

3-4 Connecting Arduino to your PC

Connect the USB port on Arduino to a USB port on your PC with a USB (A -micro B) cable.
2JCIE-EV01- AR1 Sensor Evaluation Board User's Manual (A294) 6