Care Quip Triton NC0270 User Manual

Advertisement

Quick Links

USER MANUAL
NC0270 Triton Wheelchair
Care Quip Pty Ltd
5 Millennium Court Silverwater NSW 2128
P 02 9714 1111 E info@carequip.com.au
www.carequip.com.au

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Triton NC0270 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Care Quip Triton NC0270

  • Page 1 USER MANUAL NC0270 Triton Wheelchair Care Quip Pty Ltd 5 Millennium Court Silverwater NSW 2128 P 02 9714 1111 E info@carequip.com.au www.carequip.com.au...
  • Page 2 IMPORTANT: Do not use your wheelchair until this manual has been read and understood Welcome Congratulations on choosing to buy a quality Care Quip wheelchair. All Care Quip products are manufactured to the highest standards of performance and safety. As part of our philosophy of customer service and satisfaction, Care Quip products are backed by our comprehensive one year warranty.
  • Page 3 Push Handles Backrest Backrest Storage Arm Pad Pocket Rear Wheel Seat Arm Rest Legrest Heel Strap Push Rim Tilt Bar Brake Footplate Fork Castor Safety Notes and Driving Restrictions • Tyres and brakes. Before changing any of the adjustments of this wheelchair, it is important to read the corresponding section of the user manual.
  • Page 4 DANGER • To avoid falls and dangerous situations, you should • To avoid hand injuries do not grab in between the first practice using your new wheelchair on level spokes or between the rear wheel and brakes when ground with good visibility. driving the wheelchair.
  • Page 5 Folding First remove any seat cushion and flip up the footplates. Take hold of the seat upholstery in the middle, at the front and the back and pull upwards. The wheelchair will then fold up. To fold your wheelchair so that it is as compact as possible, you can remove the legrests.
  • Page 6 Getting Out of Your Wheelchair Independently • The brakes should be on • The hinged footplates should be hinged up • With one hand on each armrest, the person should bend slightly forward to bring the body weight to the front of the seat, and with both feet firmly on the ground, one foot well back, push up into the upright position.
  • Page 7 Legrests The legrests can be flipped up to make it easier to transfer to/from the chair. For users with longer legs, the legrests can be lowered to the appropriate level by using the bolt located on the base of the footrest. Loosen the bolt, push the tubes to the desired position and then re-tighten the screws.
  • Page 8 Safety nuts should only be used once and • All parts are available through Care Quip, should be replaced after use. who hold spare parts specifically for this model •...

Table of Contents