Suncourt BOOSTER HC500 Operation Instructions

OPERATION INSTRUCTIONS FOR THE FLUSH FIT REGISTER BOOSTER
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT NOTICE
With the use of any electrical appliance, it is important to observe all basic precautions to minimize the risk associated with use, such as electrical shock, fire, or injury to
persons. Read these instructions before using your Flush Fit Register Booster
NEVER EXPOSE YOUR FLUSH FIT REGISTER BOOSTER™ TO TEMPERATURES OVER 140°F (60°C)

IMPORTANT WARNINGS

1. The Flush Fit Register Booster
™
the register is 140° Fahrenheit or 60° Centigrade. Your Flush Fit Register Booster
2. Do not in any way block the air grilles of the Flush Fit Register Booster
to contact these grilles and damage the unit.
3. Unplug the Flush Fit Register Booster
4. Do not operate the Flush Fit Register Booster
damaged, or if the housing is damaged or broken. Discard or return the unit for inspection, replacement, or repair.
5. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances.
Arrange cord away from traffic area and where it will not be tripped over.
6. The Flush Fit Register Booster
™
contact with water.
7. The Flush Fit Register Booster
™
8. Never insert any object or allow any object to enter the Flush Fit Register Booster
9. Do not use the Flush Fit Register Booster
10. The Flush Fit Register Booster
persons and will void any warranty by the manufacturer.
11. Do not use strong detergents or flammable liquids to clean the Flush Fit Register Booster
12. The housing of your Flush Fit Register Booster
to dangerous electricity, may cause fire and will void any and all warranty.

INSTALLATION

DO NOT INSTALL IN CEILING.
(4" X 10") WALL REGISTER APPLICATIONS
1. Drill (two) holes with a 3/16" drill bit from the bottom side of the Flush Fit Register Booster
pictured below.
2. Secure the Flush Fit Register Booster
WALL MOUNT DRILL HOLE LOCATION

CLEANING AND MAINTENANCE

Before cleaning the Flush Fit Register Booster
brush attachment of your vacuum cleaner, or a cloth that has been lightly moistened with water and a mild, non-abrasive detergent. Dust accumulation in the interior of the
unit may be removed by using the small round brush attachment of your vacuum cleaner. Accumulation of dust in the interior will be minimized by regular replacement of
your furnace filter as recommended by the manufacturer.

ONE YEAR LIMITED WARRANTY

Subject to the following limitations, Suncourt Inc. (manufacturer) warrants that the Flush Fit Register Booster
not exceeding 2 (two) years from date of manufacture, remain free from appearance of defects in workmanship or materials. This warranty is subject to the following
limitations: (a) manufacturer's liability is limited to the replacement or repair of the unit, as decided by the manufacturer; (b) a defective unit must be returned, prepaid, with
proof of purchase, well packaged to avoid damage in transit; and (c) this warranty does not apply to defects resulting from the alteration, abuse, accidental damage,
unauthorized repair, or misuse of the unit. This warranty is given in lieu of all other warranties, guarantees, and conditions on manufacturer's part, and the manufacturer shall
have no tortious or other liability in respect to this Flush Fit Register Booster
Returns without this RGA number will not be accepted. Actual product appearance may differ from illustrations. Suncourt reserves the right to modify any or all of its products'
features, designs, components and specifications without notice.
will be as warm as the air that is delivered from the register of your forced air furnace and/or cooling system. The maximum temperature for
when not in use. Turn the unit off before unplugging.
™
with a damaged plug or cord, if the unit malfunctions, becomes noisy when operating, has been dropped or otherwise
™
should never be exposed to moisture. Do not use the unit in an open window, bathroom, or laundry area where it may come in
is designed for indoor use only.
near flammables such as gasoline, paint, or natural gas.
™
is intended for use as described in the instructions only. Other use may cause fire, electrical shock, damage to the unit, or injury to
™
is sealed at the factory. THERE ARE NO SERVICEABLE PARTS INSIDE. Attempting to open the housing will expose you
™
in place.
™
disconnect the power cord from the outlet. Dust may be removed from the exterior surfaces using a soft cloth, the round
™
.
™
should never be exposed to higher temperatures or temperatures below freezing.
™
. Pressure on the bottom or top grilles of the Flush Fit Register Booster
™
through the bottom or top grilles, as this may damage the unit or cause it to malfunction.
™
.
™
grille. The holes should be drilled in the pre-molded location as
™
ADAPTOR PLATE SOLD SEPARATELY FOR REGISTERS UP TO 12"X6"
. Ship unit to Suncourt Inc. only after obtaining a Return Goods Authorization (RGA) number.
™
™
FITS 10" X 4" FLOOR & WALL REGISTERS
will, for 1 (one) year from date of original retail purchase, but
™
MODEL: HC500
may cause the fan impeller
™