Advertisement
Mounting Bracket
IP-00124 Rev. A – 07/12 Page 2/2
Antenna Base
Mast - 2" (50.8mm) O.D Max.
U-Bolts
L-com, Inc. – 45 Beechwood Drive – North Andover, MA 01845 USA
1-800-343-1455 • www.L-com.com
Drain Holes
Antenna Mounting
Nut & Washer
Mounting Instructions
1. Attach mounting bracket to mast as shown using (2) U-bolts and
supplied hardware.
2. Remove antenna mounting bolt and washer from antenna base.
3. Insert antenna into mounting bracket and secure with washer and
antenna mounting nut. Do not over tighten.
Note: Some models may have drain holes in the antenna base. When
installing, drain holes must be kept clear for proper operation.
Copyright © This drawing is property of L-com, Inc. All rights reserved.
Installation Instructions
Model: HGV-2402U
Note: Antenna Base may vary from photo
Advertisement
