Retigo RG 10 i Instructions For Operating

I N S T R U C T I O N F O R O P E R A T I N G
R E T I G O R E G E N E R A T O R A N D
1. Introduction
Regenerator is a great equipment for reheating, warming,
holding foods at serving temperature and regenerating frozen
meals. The temperature range is from 30 to 140°C. The ideal
humidity can be set for any type of food.
Regeneration process can be finished either when pre-set
time runs out or core probe temperature is reached.
Holding cabinet is designed to hold the meals at serving
temperature (+65°C). The temperature range is from 30 to 90°C.
The ideal humidity and can be set for any type of food.
Holding cabinet can be used for holding of foods at serving
temperature only. The heating power is not enough to regenerate
the meals.
1.1 Overview of models to be offered
model type
RG 10 i RG 10 B1
RG 10 RG 10 D1
HC 10 i RG 10 I3
HC 10 RG 10 D3
INSTRUCTION FOR OPERATING RETIGO
REGENERATOR AND HOLDING CABINET
H O L D I N G C A B I N E T
Amount of food
for a quick
warming
25kg
22kg
-
-
2. Control panel
Control panel for regenerator and holding cabinet
T1 – display
T2 – time
T3 – temperature
T4 – moisture
T5 – increasing of values while setting
T6 – decreasing of values while setting
T7 – start and stop button
T8 – core temperature probe
T9 – switch off button
T10 – switch on button
Holding
regeneration at serving
temperature
yes yes
yes yes
- yes
- yes
humidity boiler
yes -
- -
yes -
- -
1