TP-Link TL-WR843ND Quick Installation Manual page 12

Appendix 2: With PoE Setup
SOCKET
Passive PoE Injector
Connect the INTERNET port of your Router to the PoE port on the
1
Passive PoE injector with an Ethernet Cable.
2 Connect your computer to the LAN port of your Passive PoE
injector with an Ethernet Cable.
3 Plug the provided power adapter into the DC jack on the Passive
PoE injector, and the other end to a standard electrical wall socket.
Press the ON/OFF button to power on the Router.
1. The passive PoE injector supports a cable length up to 30
Note
meters due to the environment.
2. If you need a longer data transmission distance (not
exceeding 100 meters), TP-LINK's 48V PoE adapters
such as TL-POE200, TL-POE150S and TL-POE10R are
recommended.
Product information can be found on our official website http://www.tp-
link.com.
WISP Signal
Notebook
9
TL-WR843ND