Table of Contents
Advertisement
Network Configuration for Windows XP:
The following is an example of how to configure the Windows XP TCP/IP network settings:
Step 1: At the Windows XP Desktop, click
"Start", then select and click on the
"Control Panel" item as shown in the
screen below.
Step 2: At the Control Panel window, select
and double click on the "Network and
Internet Connections" icon.
Step 3: In the Network and Internet
Connections window, click on the "Network
Connections" icon located in the lower
right corner of the window.
Step 4: In the Network Connections window,
click on the "Local Area Connection" icon for
your Ethernet adapter. Then click on the
"Properties"
button
Connection Status panel.
Connections
Properties
"Internet Protocol (TCP/IP)" item and then click
on the "Properties" button.
Step 5: In the Internet Protocol (TCP/IP)
Properties panel, select "Obtain an IP address
automatically". Click the " O K" button at the
bottom of the panel.
pressing the "OK" buttons.
Step 6: You should now be able to access the
PCX5000 configuration pages.
browser
and
http://192.168.100.1"
"Configuring the PCX5000 Gateway" section
of this manual.
19
in
the
Local
Area
In the Local Area
panel,
select
the
Close each panel by
Launch the
open
location:"
Proceed
to
the
Advertisement
Table of Contents
