Summary of Contents for Panblast Tornado
- Page 1 PRODUCT OPERATING MANUAL PANBLAST TORNADO INTERNAL PIPE BLASTING TOOL Manual Number: ZVP‐PC‐0068‐00 ...
- Page 2 SECTION GENERAL INFORMATION INTRODUCTION INITIAL SETUP INSTRUCTIONS OPERATING INSTRUCTIONS MAINTENANCE TROUBLE SHOOTING GUIDE ASSEMBLIES, PARTS LISTING & EXPLODED VIEW ...
- Page 3 IMMEDIATELY TO THE SIGNAL. the pressure required. INTRODUCTION Standard safety precautions The Tornado Internal Pipe Blasting Tool Set is 1.3.1 Approved safety eyewear, hearing and footwear designed to clean the internal surfaces of pipes ...
- Page 4 Fitting of the small range scissor carriage ABOVE. 3.4.1 Slide the back end of the Tornado tool into the ! WARNING! – ENSURE THAT THE BLAST NOZZLE expanded carriage, through the front collar and SELECTION IS MATCHED TO THE COMPRESSED AIR into the rear collar, the rear collar should be VOLUME AS PER TABLE 2.2 - THE USE OF UNDERSIZED...
- Page 5 Now fit the appropriate leg assemblies to the any dust that may have built up. front carriage body and rear lance carriage body, adjust so that the Tornado tool and the lance 5.1.7 Visually check the spring to ensure it is in are centered within the pipe, and also check that working order.
- Page 6 THE UNIT HAS BEEN RUNNING FOR ANY 6.3.3 Tornado tool is loose in the carriage, inspect LENGTH OF TIME, USE HEAT RESISTANT and tighten. GLOVES WHEN WORKING CENTRIFUGAL SPEED LIMITER. 5.4.3 Remove the centrifugal speed limiter housing. 5.4.4 Inspect the centrifugal speed limiter brake shoe...
-
Page 7: Table Of Contents
Tornado Internal Pipe Blasting Tool Set Service Kit Stock Code Description Tornado Front End Service Kit - Includes Items: 3(2 Off), 4, 5, 9, 10, 19(2 Off), 23(4 Off), BAC-BA-0220-00 24(4 0ff), 25(4 Off) Tornado Rear End Service Kit - Includes Items: 9, 10, 16, 17, 18, 24(4 Off), 25(4 Off),... - Page 8 7.1.3 Tornado Internal Pipe Blasting Tool Set Exploded View ...
-
Page 9: Bac-Ba-0170-00
Tornado Mid Range Carriage Set (Items 1, 2, 4, 5) 9.10 Kg (20.0 lbs) BAC-BA-0165-00 Tornado Large Range Carriage Set (Items 1, 3, 4, 5) 9.60 Kg (21.16 lbs) 7.2.1 Tornado Internal Pipe Blasting Tool Set - Carriage Set Part List Item Stock Code Description YAC-BA-0168-00 Front Body... -
Page 10: Bac-Ba-0206-00
Tornado Internal Pipe Blasting Tool Set- Large Rotating Head Assembly Stock Code Description Weight BAC-BA-0206-00 2" Tornado Large Rotating Head Assembly 0.80kg (1.76lbs) 7.3.1 Tornado Internal Pipe Blasting Tool Set- Large Rotating Head Parts List Item Stock Code Description BAC-BA-0133-00 50mm 2" Contractor Large Rotating Head YAC-FN-0319-00 Screw 7.3.2... -
Page 11: Bac-Nz-0478-01
ATN-T Blast Nozzle Assemblies Stock Code Description Orifice Length Weight BAC-NZ-0478-01 Blast Nozzle ATN-5T Aluminum/Tungsten 8mm (5/16”) 75mm (3”) 0.24kg (0.93lbs) BAC-NZ-0482-01 Blast Nozzle ATN-6T Aluminum/Tungsten 9.5mm (3/8”) 100mm (4”) 0.36kg (0.80lbs) 7.4.1 ATN-T Blast Nozzle Exploded View - 9 – ZVP-PC-0068-00-R2... -
Page 12: Bac-Nz-Pb-0003
UTN-6 Blast Nozzle Assembly Stock Code Description Orifice Length Weight BAC-NZ-PB-0003 Blast Nozzle UTN-6 Urethane/Tungsten 9.5mm (3/8”) 178mm (7”) 0.90kg (1.98lbs) 7.5.1 UTN-6 Blast Nozzle Parts List Item Stock Code Description YAC-NZ-PB-0045 Nozzle Tungsten Carbide UTN-6 BAC-NZ-PB-0031 RNW-32 Nozzle Washer – 10 Pcs 7.5.2 UTN-6 Blast Nozzle Exploded View ...
Need help?
Do you have a question about the Tornado and is the answer not in the manual?
Questions and answers