Page 2
Sehr geehrter Kunde, wir gratulieren Ihnen zum Erwerb Ihrer Markise. Lesen Sie die folgenden Hinweise sorgfältig durch und befolgen Sie diese, um möglichen Schäden vorzubeugen. Für Schäden, die durch Missachtung der Hinweise und unsachgemäßen Gebrauch entstehen, übernehmen wir keine Haftung. Sicherheitshinweise •...
Montage Benötigtes Werkzeug • Schraubendreher • Markierstift Benötigte Anzahl von Personen: 4 • Bohrmaschine Schritt 1 Schritt 2 Zeichnen Sie Bohrlöcher Bohren Sie die Löcher (12x65 mm). Die Stahldübel dort vor, wo die Haupthülse kommen unter die Löcher. Drehen Sie die Schrauben aufgestellt werden soll.
Page 4
Schritt 3 Stellen Sie die Endhülsen in einem Abstand von bis zu 3 Metern auf. Wiederholen Sie für die Endhülsen die Schritte 1 und 2. Schritt 4 Nun können Sie den Schirm aufziehen und ihn an den Endhülsen befestigen. Die Haupthülse kann auch als Eckpunkt dienen.
Dear Customer, Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following hints on installation and use to avoid technical damages. Any failure caused by ignoring the items and cautions mentioned in the operation and installation instructions are not covered by our warranty and any liability.
Page 6
Mounting Needed tools • Screwdriver • Pen for marking Needed number of persons: 4 • Drilling machine Step 1 Step 2 Mark the drill holes where Drill the holes (12x65 mm). The steel dowels go you want to install the main underneath the holes.
Page 7
Step 3 Place the end poles at a maximum distance of 3 metres. Repeat the steps 1 and 2 for each end pole. Step 4 Now you can pull out the screen and fasten it to the end poles. The main body can serve as a corner. 12 x 65 Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin.
Need help?
Do you have a question about the 10029125 and is the answer not in the manual?
Questions and answers