ProTalk TK-3130 Quick Programming Manual

Quick Programming Guide -
All of your radios must be set to the same frequency and QuietTalk code for them to talk to each other.
To save trouble and confusion, do not change other settings. Follow the Master Reset procedure on the next page and start over if you think
there is more than one programming problem with a radio.
Frequencies
TK-3130 radios have two channels, which can be set to any of eight different frequencies. This lets you have a
conversation on channel two without others on channel one listening in. If you don't need this feature, set both channels to the same
frequency to avoid accidentally "switching off channel" and not hearing what is said on the main channel.
If you make a mistake while following the instructions below, turn the radio off before pressing Mon and radio the radio will return to its
previous settings.
1. Turn the radio on while
Check
holding Menu. Release Menu
Frequencies
once when numbers appear in
the Radio
the display
is Set To
My Frequencies
2. Press the Up arrow once
Ch 1 = F____
Ch 2 = F____
3. Turn the radio off
1. Turn the radio on while
Change
holding Menu. Release Menu
the
when numbers appear in the
Frequency of
display.
Channel One
or Two
2. Press the Up or Down arrow
chose the channel you want to
(Hint—all your
program
radios should
have the same
3. Press Menu to select a
channel and
different frequency — pressing
frequency
Menu additional times continues
combination.
to change the frequency
For instance
(up to frequency 8)
channel one =
4. When desired frequency is
frequency 2,
displayed, press Mon
channel two =
frequency 8) 5. Repeat steps above to
change the frequency of the
other channel if desired.
Seeing Other
Letters
You pressed the Up or Down
arrow too many times
as You
Program?
QuietTalk Codes
receives a signal with a different code from the one it is programmed with, you will not hear the signal. Does not make your
conversations private. If your radio is programmed to the zero or "OFF" position, you will hear any signal on that frequency, but
others who have a code programmed will not be able to hear you. Setting a code on one channel changes it for both channels.
1. With the radio already
Set
turned on, press Menu once
QuietTalk
2. Press the Up or Down arrow
for Both
until the code number you want
Channels
is displayed
My QT Code
3. Press Mon
______
What To Do
See page two of the instruction manual for the location of knobs and buttons.
Displays a channel number and
frequency —
Displays a channel number and
frequency —
2
-
Displays channel number and
frequency —
Displays channel number and
frequency —
Beeps and displays the new
frequency each time press
Double beeps and the F# goes away
Displays things like Ct, CA, LP, or BL
Also known as "Privacy", "Interference Eliminator " and "Private Line" codes. When a radio
What To Do
Displays a large 1 or 2 and a flashing
number from 01 to 83 or a flashing OF
Double beeps and displays a large 1
or 2 and a number from 01 to 83 or
OF — example
What the Radio Does
1
-F2 for example
F8 for example
1
-F2 for example
2-
F8 for example
What the Radio Does
1-
38
TK-3130 Radios
What It Means
1 is the current channel, The current
frequency number appears next to the "F".
In the example, channel one is set to
frequency 2
2 is the current channel, The current
frequency number appears next to the "F".
In the example, channel two is set to
frequency 8
1 is the current channel, The current
frequency number appears next to the "F".
In the example, channel one is set to
frequency 2
2 is the current channel, The current
frequency number appears next to the "F".
In the example, channel two
is set to frequency 8
Frequency is locked in and you are back in
regular use mode
These are for setting other features. Press
the Up or Down arrow until you get back to
the 1-F or 2-F. Or turn the radio off and
start again.
What It Means
The large number is the current channel.
The flashing number is the current code.
The large number is the current channel.
The smaller number is the current code.