Table of Contents
Advertisement
Quick Links
Side Panel Diagram
Default Settings for the Rugged Vision DVR
• All Cameras are enabled and recording continuously 24/7
• Date and Time info (can be changed under Setup/System/Date/Time)
* Date – internal time clock will bring up the correct date when system is powered
* Time – set to central time zone (GMT-6)
• Network Settings (Statically assigned through the Rugged CCTV test network)
- IP Address – 192.168.001.012
- Subnet Mask – 255.255.255.000
- Default Gateway – 192.168.001.001
- DNS completely left as 0's
- These will more than likely need to be changed to be able to communicate with the customers network
• User names and Passwords (these can be changed under setup/Admin/system/user)
* At the DVR
- Admin and 5678
- User5 and 5555
- User1 and 1111
- User6 and 6666
- User2 and 2222
- User7 and 7777
- User3 and 3333
- User8 and 8888
- User4 and 4444
- User9 and 9999
* On the remote software – admin and password
* Through web browser - Admin and 5678
RUGGED CCTV
201 North Elm Street, Kemp, Texas 75143
1-866-301-CCTV
Phone: 903-498-3240 • Fax: 903-498-8989
www.rugged-cctv.com
techsupport@rugged-cctv.com
Mode
MODE
UP
DOWN
RIGHT
LEFT
SELECT
BACK
RUGGED
Quick
Reference
Guide
RUGGED CCTV
Advertisement
Table of Contents
Related Manuals for Rugged CCTV Rugged Vision
Summary of Contents for Rugged CCTV Rugged Vision
- Page 1 * Date – internal time clock will bring up the correct date when system is powered * Time – set to central time zone (GMT-6) • Network Settings (Statically assigned through the Rugged CCTV test network) - IP Address – 192.168.001.012 - Subnet Mask –...
- Page 2 Quick Reference Steps for the Rugged Vision DVR Most General Information to Guide you through the DVR Commonly • Follow power up instructions to power unit. To shut the system down hit Live Menu, Shutdown, and input password • Some menu functions require password input. When asked select user name, input password and press enter to...
Need help?
Do you have a question about the Rugged Vision and is the answer not in the manual?
Questions and answers