Table of Contents
Advertisement
Quick Links
Dundalk LeisureCraft
Harvia Woodburning Heater
Assembly Instructions
Start by removing all protective film from
Install floor protecting sheet against back wall
stainless steel parts before installation.
centered between benches.
Install back wall shield centered over chimney
Remove the rear chimney cover from the stove.
hole with 1 ½" screws.
Insert the Chimney adapter into rear hole
Bring stove into position, centered in front of
tapping with a rubber mallet until it is snug.
hole, about 6" away from wall.
Ph: 519-923-9813 | Fax: 866-458-7583 | Web: www.dundalkleisurecraft.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Dundalk LeisureCraft Harvia
- Page 1 Dundalk LeisureCraft Harvia Woodburning Heater Assembly Instructions Start by removing all protective film from Install floor protecting sheet against back wall stainless steel parts before installation. centered between benches. Install back wall shield centered over chimney Remove the rear chimney cover from the stove.
- Page 2 Dundalk LeisureCraft Harvia Woodburning Heater Assembly Instructions Place the short connector through the hole in Slide short connector onto chimney adapter. sauna from the outside. Insert the “T” connector to the short connector Secure with provided screws. ensuring it is straight.
- Page 3 Dundalk LeisureCraft Harvia Woodburning Heater Assembly Instructions Attach rain guard to top chimney piece and Wrap the chimney support strap around chimney secure with provided screws. and use the provided nut and bolt to secure. Attach chimney support braces to the sauna Ensure not to screw into any seams.
Need help?
Do you have a question about the Harvia and is the answer not in the manual?
Questions and answers