Table of Contents
Advertisement
Quick Links
User Guide
imagine
Status indicators
Microphone
Outlet for charger
imagine
Thank you for choosing
2U2
! You have a noWire handsfree teleconference unit
®
based on Bluetooth transmission technology in your hands.
®
with any mobile phone equipped with Bluetooth supporting the headset- and
handsfree profile. Recommended distance to mobile: 0.5 to 6 meters.
mobile phone is required to make use of all the features in
UG20en-06Jul04
Get to know imagine 2U2
2U2
Transfer call
between handset
Speaker
and imagine 2U2
Charging
Before use,
included charger. Insert plug as illustrated below.
Keypad
Standby: 450 hours. Operation: 24 hours.
Turn the unit on/off
imagine
2U2
may be used
After charging, the unit may be turned ON.
Hold
Support by your
imagine
2U2
.
A responding tone indicates an active unit.
(Use the same procedure for turning the unit OFF)
Power and
Microphone Mute
Reset
Restart unit
Volume
Also used for pairing
Hook on/off
imagine
2U2
must be charged with
A red light will be
lit. The red light
is turned off when
the unit is fully
charged.
Charging takes
up to 4 hours.
down for three seconds.
Pairing imagine
with a mobile
2U2
Push both ends of the volume control.
The blue and yellow lamps flash.
imagine
2U2
is ready for
pairing with the mobile.
®
- Activate Bluetooth on the mobile
- Search for sound equipment in
- Select "imagine 2U2"
- Confirm by entering a password: 0000
Hint: For instructions for your mobile,
see www.imaginenowire.no/mobile
Bluetooth link
®
Depending on the mobile, the Bluetooth link
may either be constantly active, or activated
when required. A steady or flashing blue light
indicates the status during Standby. When the
unit is active, the blue light is always on. The
yellow light turns on when the unit requires
recharging. The link may be deactivated by
pressing
for three seconds.
The link may be reactivated in the same manner.
Using imagine 2U2
To accept incoming calls or terminate an active
call, press
.
By pressing
the call is rejected.
The sound will automatically be transferred to
imagine
2U2
. If not, push
®
Bluetooth menu
®
.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Imagine 2U2
- Page 1 Get to know imagine 2U2 Pairing imagine with a mobile User Guide Push both ends of the volume control. The blue and yellow lamps flash. Power and imagine is ready for Microphone Mute Reset imagine pairing with the mobile. Restart unit Volume ®...
- Page 2 The microphone may be muted. The party at Limited warranty the other end cannot hear you, and internal discussions may take place in private. Only use chargers supplied by Imagine noWire. The use of other than original accessories voids Push during a conversation to mute the the warranty.
Need help?
Do you have a question about the 2U2 and is the answer not in the manual?
Questions and answers