J&D MAnufacturing WEATHER HOOD Manual

GALVANIZED WEATHER HOOD

WARRANTY

J&D Manufacturing warrants all products are free from defects in materials and
workmanship under normal use for the period of one year from date of purchase.
Our warranty does not cover normal or regular wear and tear. J&D Manufacturing
can repair or replace at our option, any product or part of the product that is found
to be defective. Our warranty applies to materials only, and does not include return
freight, delivery, loss or damage to personal property, cost of removal or
installation, any incidental or consequential damages or labor. This warranty does
not apply to products which are misused, abused, altered, improperly installed or
subject to negligence. All warranties must be approved through our warranty
department. The original purchaser must present a copy of the invoice for the
defective product. One year is our standard warranty unless specified on our
literature or in the installation instructions or user manuals.

RECOMMENDED TOOLS FOR ASSEMBLY (NOT PROVIDED)

Protective Gloves Safety Glasses

INCLUDED ASSEMBLY HARDWARE - TO SCALE

#10 x 1"
Square Head Tek Screw
INSTALLATION HARDWARE IS NOT PROVIDED
IS226-11I
#2 Square Drive Bit
& Drill
J&D Manufacturing • 6200 Hwy 12 • Eau Claire, WI 54701 • 1-800-998-2398 • www.jdmfg.com
PARTS LEGEND
Left Panel

INSTALLATION

Please read over all instructions carefully before you begin.
If you have any questions please call your local dealer, or
contact J&D Manufacturing at 1-800-998-2398.
To assemble, slightly bend the shape of the front panel to align with the
top edges of the side panels. The tabs on the front panel should overlap
the side panels on the outside as shown.
1
Front Panel
Right Panel
Page 1 of 2