Pyle SereneLife PHSPAMT24HT User Manual page 6

Bubble bath spa mat
Table of Contents

Advertisement

● Make sure the ON/OFF switch on the main unit is at the position "O"
● Make sure there is a pleasant room temperature in the bathroom.
● Before using the product for the first time, we suggest to give your bath tub
a deep cleaning for the soft mat to adhere to the tub floor better.
● Place the bath mat into the bath tub with the air connector on the mat at
the foot end. Press down every suction cup.
Tip: the suction cups adhere better if you dampen the floor of the bath tub
with a slight amount of water.
● Connect the hose end with the valve and aroma clip to the main unit, and
the other hose end to the connector on the bath mat.
● Start to fill the bath tub with water that has a pleasant temperature. Please
do not use any bath foam.
● Plug the power cord into the socket.
CAUTIONS:
For safety, the main unit must be kept at least 60CM away from the
bathtub and always keep the floor dry when the appliance is put on the
floor.
AROMA CLIP ASSEMBLY:
● Put a drop of essential oil on the cotton pad, place the cotton pad on
aroma clip and close the aroma clip (Fig. 1)
● Insert the aroma clip into the tube end (Fig. 2)
● Plug the air hose into main machine (Fig. 3)
www.SereneLifehome.com
Fig. 1
Fig. 2
Fig 3
5

Advertisement

Table of Contents
loading

Table of Contents