Breathable Air; Compressed-Air Airline Supplies; Personnel Training; Servicing - Scott Safety PROPAK Series Manual

INTRODUCTION

BREATHABLE AIR

Air used to supply or charge breathing air may
be natural or synthetic and must comply with
EN 12021 : 1999 or AS/NZS1715 : 2009.
COMPRESSED-AIR AIRLINE
SUPPLIES
Air for use with compressed-air airlines must
conform to EN 12021 : 1999 or AS/NZS1715 :
2009 and must have a dew-point sufficiently
low to prevent internal freezing when the
apparatus is used in temperatures below 4

PERSONNEL TRAINING

Personnel who use self-contained, compressed-
air breathing apparatus must be fully trained
in accordance with these instructions and
national regulations.
These instructions cannot replace an accredited
training course run by fully qualified instructors
in the proper and safe use of Scott Safety
breathing apparatus.

SERVICING

Propak must be serviced at scheduled intervals
by personnel who have completed a formal
training course and hold a current certificate
for the servicing and repair of Scott Safety
breathing apparatus. Details of the servicing
schedule are contained in the Scott Safety
Propak Service Manual, copies of which can
only be obtained by registered holders of a
current certificate.
Parts must be repaired or replaced as and
when an issue arises.
Your distributor or Training and Technical
Support Services at Scott Safety will be
pleased to provide training course details and
quotes for service contracts.
SPARE PARTS AND
ACCESSORIES
Customer Services
friendly, customer contact point for ordering
new apparatus, spare parts and accessories.
The team can also provide general information
on Scott Safety products.

WARRANTY

The products manufactured at our factory in
Skelmersdale carry a warranty of 12 months
(unless stated otherwise) for parts, labour and
return to site. The warranty period runs from
the date of purchase by the end user.
C.
o
These products are warranted to be free
from defects in materials and workmanship
at the time of delivery. Scott Safety will
be under no liability for any defect arising
from wilful damage, negligence, abnormal
working conditions, failure to follow the
original manufacturer's instructions, misuse or
unauthorised alteration or repair.
Evidence of purchase date will need to be
provided for any claims arising during the
warranty period. All warranty claims must be
directed through Customer Services and in
accordance with our sales return procedure.

NOTIFIED BODIES

BSI (0086)
Kitemark Court,
Davy Ave,
Knowlhill,
Milton Keynes,
MK5 8PP.
England
3
provide an efficient,
PROPAK i / f / fx