Advertisement
Instruction for Use for Portable Lift "Reacher"
The "Reacher" provides an easy way to install
and remove a portable lift from the track trolley.
How to install and use the Reacher
1) If applicable, remove the existing single action carabiner from the reacher and/or lift's strap, and dispose of
it properly.
2) Hook the new triple action carabiner to the lift's strap.
To open the triple action carabiner, proceed as shown
in the picture at right.
3) Hook the lift's carabiner onto the closed ring of the reacher.
Hook the lift's carabiner onto the closed ring of the reacher.
4) Unwind the strap from the lift long enough to be able to reach the trolley without supporting the weight of
the lift.
5) Insert the hook of the "Reacher" into the track trolley eyelet.
Reacher
Carabiner
Lift's
strap
Fig. 1
WARNING: Any other installation method is unsafe and may result in injuries.
001.08315.EN rev. 6
Model #700-08310 and # 700-08320
1
Rewind strap
3
Lift
2
Trolley
4
5
1 / 2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Getinge Arjohuntleigh Reacher Series
- Page 1 Instruction for Use for Portable Lift “Reacher” Model #700-08310 and # 700-08320 The “Reacher” provides an easy way to install and remove a portable lift from the track trolley. How to install and use the Reacher 1) If applicable, remove the existing single action carabiner from the reacher and/or lift’s strap, and dispose of it properly.
- Page 2 WARNING: Be careful when applying weight to the strap as the “Reacher” will quickly move up to an horizontal position which could hit people standing close by, resulting in injuries. 6) The patient can be lifted after the portable lift and the reacher are properly installed.
Need help?
Do you have a question about the Arjohuntleigh Reacher Series and is the answer not in the manual?
Questions and answers