Advertisement
INSTALLATION INSTRUCTIONS
KENT
TM
MIRROR
M-KENT-30BE / M-KENT-30WW
THANK YOU FOR CHOOSING RYVYR
Please take a few minutes to review this manual before you start installation. If you encounter
any installation problems, please don't hesitate to contact us. Before you begin, please
observe all local building codes. Unpack the new product and inspect for damage. The
appearance of your vanity may differ from the illustrations in this guide. These instructions
still apply. Please ensure the finished wall is straight and plumb and the floor is flat and
perpendicular to the finished wall.
SUGGESTED TOOLS AND MATERIALS
10'
Phillips Screwdriver
Level
Drill
Tape Measure
Safety Glasses
ROUGH-IN DIMENSIONS
08.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time
Advertisement
Table of Contents
Summary of Contents for Ryvyr KENT M-KENT-30BE
- Page 1 Please ensure the finished wall is straight and plumb and the floor is flat and perpendicular to the finished wall. SUGGESTED TOOLS AND MATERIALS Phillips Screwdriver Level Drill Tape Measure Safety Glasses ROUGH-IN DIMENSIONS 08.2014 For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time...
- Page 2 • Clean the mirror using a soft, slightly damp cloth. When cleaning the mirror, spray the mirror with a glass cleaner and wipe clean. Avoid using silicone cleaners and waxes. 08.2014 For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time...
Need help?
Do you have a question about the KENT M-KENT-30BE and is the answer not in the manual?
Questions and answers