Dual Pointing Device - Toshiba Satellite R800 Series User Manual

Dual Pointing device

If you are using a USB mouse, you should also refer to both the
mouse
mouse.
Touch Pad/AccuPoint
Problem
Either the Touch Pad
or the AccuPoint
does not work.
On-screen pointer
does not respond to
pointing device
operation
Double-tapping
(Touch Pad) or
double-clicking
(AccuPoint) does not
work
The on-screen
pointer moves too
fast or too slow
The reaction of Touch
pad is either too
sensitive or not
sensitive enough.
User's Manual
section in this chapter, and the documentation supplied with your
Procedure
Check the Device Select settings.
Click Start -> Control Panel -> Hardware and
Sound -> Mouse.
In this instance the system might be busy - Try
moving the mouse again after waiting a short while.
In this instance, you should initially try changing the
double-click speed setting within the Mouse Control
utility.
1. To access this utility, click Start -> Control
2. Within the Mouse Properties window, click the
3. Set the double-click speed as required and click
In this instance, you should initially try changing the
speed setting within the Mouse Control utility.
1. To access this utility, click Start -> Control
2. Within the Mouse Properties window, click the
3. Set the pointer speed as required and click OK.
Adjust the touch Sensitivity.
To access it, click Start -> Control Panel ->
Hardware and Sound -> Mouse.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
Panel -> Hardware and Sound -> Mouse.
Buttons tab.
OK.
Panel -> Hardware and Sound -> Mouse.
Pointer Options tab.
USB
6-10