Setting Up the Display
Connecting Your Display
WARNING: Before you begin any of the procedures in this section, follow the
Safety
Instructions.
To connect your display to the computer:
1. Turn off your computer.
2. Connect the HDMI/DP/USB Type-C/USB cable from your display to the computer.
3. Switch on your display.
4. Select the correct input source at Display OSD Menu and turn on your computer.
Optiplex (Optional)
Attaching the Optiplex
•
Open the carton, take out the Optiplex holder
and accessories box .
•
Included accessories: Cables, Remote Control &
Batteries, Remote control holder , Stylus, Wire
Saddle and manual.
1.
Remove cable cover.
2.
Insert the Optiplex PC and power adapter into
the respective compartments.
3.
Plug in the cables and route the cables using
the cable management hooks that is within the
PC box holder.
Setting Up the Display
|
25