Advertisement
f. Connect the monitoring device to the module using terminal 7 as the
power source, terminal 4 as the signal wire, and terminal 8 as the
ground wire.
V. Using the 4-20 mA Output Module
c. There are two versions of the 4-20 mA Output Module. One is
designed to output 20mA when the pulse rate is 32 pulses/minute.
The other is designed to output 20mA when the pulse rate is 4095
pulses/min.
d. If the unit is switched on and off via terminal 6, the power must remain
on for 1 minute before the reading is valid.
VI. Specifications
Range:
Operating Temperature:
Size of unit:
Weight:
VII. Maintenance
a. The unit should be cleaned periodically using a damp clean cloth. Do
not use Acetone.
Global Water
800-876-1172 • globalw.com
4-20mA
0° to +51°C
3.25"x1.5"x2"
.5 lb.
- 4 -
Advertisement
