Download Print this page

EZI-GRIP BOOT MOUNTED Series Fitting Instruction

Bike rack

Advertisement

Quick Links

Fitting Instruction for EZI-GRIP Bike Rack
Congratulations on purchasing Ezi-Grip to carry your valued bicycles. We are sure you will get many years of en-
joyable use from your Ezi-Grip Bike Rack. These racks are manufactured from high-grade materials making them
EZI GRIP BIKE RACK RANGE BOOT MOUNTED
SERIES
Best Bars Limited, Auckland, New Zealand
one of the best available on the market.
Issue Date: 23 March 2009
Issue:
1
Page : 1 of 5

Advertisement

loading
Need help?

Need help?

Do you have a question about the BOOT MOUNTED Series and is the answer not in the manual?

Questions and answers

Summary of Contents for EZI-GRIP BOOT MOUNTED Series

  • Page 1 Fitting Instruction for EZI-GRIP Bike Rack Congratulations on purchasing Ezi-Grip to carry your valued bicycles. We are sure you will get many years of en- joyable use from your Ezi-Grip Bike Rack. These racks are manufactured from high-grade materials making them one of the best available on the market.
  • Page 2 Fitting Instruction for EZI GRIP Bike Rack SAFETY CRITICAL WARNING Bicycles or racks falling on the road can cause serious accidents – do not use this rack on any vehicle on which it can not be properly mounted as described in this instruction sheet. Top hooks must be completely hooked over solid metal edges at top/front of trunk lid or rear door –...
  • Page 3 Fitting Instruction for EZI GRIP Bike Rack STEP Fit the two loosely supplied straps to the lower holes in the rack frame, ensure the bolt neck locates correctly and that the supplied washers and nyloc nut are used. Partially tighten the nyloc nuts. Final tightening will be done when the strap is fitted to the vehicle.
  • Page 4 Fitting Instruction for EZI GRIP Bike Rack STEP Attach and lightly tension the two bottom strap hooks to a suitable anchorage point near the bottom of the bumper. Ensure that the strap is not rubbing against any sharp objects. Tighten the lower strap fixing bolts taking care not to crush the tube.
  • Page 5: Limited Warranty

    The Ezi-Grip bike rack is designed to carry bicycles. Do not use the Ezi-Grip bike rack for purposes other than for which it is designed or exceed the recommended maximum number and/or weight of bicycles prescribed as this will invali- date the warranty.