Sony Wega KDE42XBR950 Operating Instructions Manual page 26

install the display unit using an optional stand or rock unit.
For details, refer to the operating mstructlons supplied with your stand or rack unit
Connect the other end of display interface cable to the Media receiver unit's
DISPLAY SIGNAL OUT jaclcs, and connect the AC power cord supplied'_ To
the media receiver unit's AC IN jack.
Display interface AC power cora
cable (supplied) (supplied)
After making all connections, connect the AC power cords Isupplied to wall
outlets.
Be sure to use the supplied AC power cords.
When connecting optional components, do not connect the AC
power cords to wall outlets until you have completed making all
connections.
Do not tighten the screws too much. It may damage the screws.
Handle the display interface cable with care. If you pull the
cable by catching your feet on the cable, this unit may fall and
cause
injury.
Do not use damaged cables, such as cables whose connectors
are deformed.