NYC-HB
SW-60504/SW-60504-SA
PG 1/2
Function Instruction - 1
To Adjust Seat Height:
While seated, lean forward and reach under the right side of
the chair to nd the lever. Lift the lever and raise your body
up slightly to allow the chair to rise to the desired height.
Once desired height is reached, release lever to lock chair at
desired height. To lower the seat, lift the lever while seated.
The chair will descend until the lever is released or the chair
reaches the bottom position.
Function Instruction - 3
To Operate Tilt Lockout:
While seated, reach under the left side of the chair to nd the
knob. Pull the knob all the way out (away from the gas lift)
for easy reaching. Turn the knob frontward and lean back to
allow the chair to tilt backwards. To lock the chair in the
upright or vertical position, sit upright and turn the knob
backward.
Please check all components are included prior to assembling.
For assistance call (833) 265 - 5177
OPERATING INSTRUCTIONS
Function Instruction - 2
To Adjust Tension On The Tilt:
While seated, reach under the right side of the chair to nd
the knob. Pull the knob all the way out (away from the gas
lift) for easy reaching. Grasp the round knob and turn it
frontward to stiffen the tilt mechanism for a heavier user.
Turn the knob backward to loosen the tilt mechanism for a
lighter user. Rotate the knob until the desired resistance is
reached.
Need help?
Do you have a question about the NYC-HB SW-60504 and is the answer not in the manual?
Questions and answers