Advertisement
fig.5
4.1.
Attaching the shoulder strap.
4.1.1.
Pull the carrying strap through the opening under the carry handle so that the strap retainer is at the front (fig.1).
4.1.2.
Push the strap retainer sideways into the carrying strap.
4.1.3.
Pull back the carrying strap until it snaps into place and is prevented from sliding out (fig.2).
4.1.4.
Pass the end of the strap through the opening on the side of the tank (fig.3)
4.1.5.
Pass strap through the strap retainer (fig.4).
4.1.6.
Pass strap back through the opening on the side of the tank (fig.5).
4.1.7.
Pull strap to adjust length of shoulder strap and to lock in place (fig.6).
4.1.8.
Attach other end of strap to opposite side of tank using the hook/strap retainer, adjust to suit.
fig.7
4.2.
Attaching pump lever
note: If you are right-handed the pump lever should be on the left-hand side so that you can hold the spray lance in your right hand.
or visa a versa.
4.3.
Use the hole on the back side of the tank bottom, push the lever through the hole (fig.7).
4.4.
Fix the lever in position by using the lever holder (fig.8). Clip into position using location hole in lever (fig.9).
4.5.
Attach Rod wire as shown in (fig.10).
Fig.10
1 - Hose
2 - Trigger
3 - lance
4 - nozzle
5 - Container Cap
6 - lid Sealing Ring
7 - Valve
8 - Filter
9 - Tank
10 - Bottom
11 - Air Chamber
12 - Pump Sealing Ring
13 - Washer of lower Pump
14 - lower Pump Valve
15 - Stir Part
16 - lower Pump
17 - lower Pump o Ring
18 - Valve
19 - Strap Retainer
20 - Strap
21 - lever Holder
22 - Soft Handle
23 - lever
24 - Rod Wire
25 - Washer x 3
26 - R Type PIn x 2
© Jack Sealey limited
fig.6
fig.8
Original Language Version
fig.9
fig.10
SS4.V2 | Issue 1 17/04/18
Advertisement
