Download Print this page

Waterworks SB-100HD User Manual

Enhanced oxygen spray bottle

Advertisement

Quick Links

E N H A N C E D O X Y G E N S P R A Y B O T T L E
USER MANUAL
Model: SB-100HD
clean with the
power of nature

Advertisement

loading

Summary of Contents for Waterworks SB-100HD

  • Page 1 E N H A N C E D O X Y G E N S P R A Y B O T T L E USER MANUAL Model: SB-100HD clean with the power of nature...
  • Page 2: Proper Use

    Preventative Maintenance / Cleaning ........ 8 The O waterworks Enhanced Oxygen Spray Bottle is intended for residential use. It is designed for safe operation when used as directed. The following general safety precautions provide guidance for safe use. Failure to comply with the safety precautions or warnings indicated in this manual violates the safety standards of this equipment.
  • Page 3: Technical Data

    SAFET Y TEC HN IC AL DATA (cont’d) 1.4 IMPORTANT INSTRUCTIONS SPECIFICATIONS NOTICE Materials PC/ABS Impact Resistant Plastic To avoid appliance damage: Weight ~ 2 lb (0.9 kg) Do not drop the bottle. (empty) – Dropping the bottle may cause breakage. Dimensions 4 in x 4 in x 10 in (in mm)
  • Page 4: Key Components

    • Ensures e cacy and compliance with EPA requirements DESCRIPTION Dependable, On-Demand Solution The O waterworks Enhanced Oxygen Spray Bottle o ers a water-based • Ozone (O3) is activated as-needed alternative to tradtional cleaners and sanitizers. It turns potable water into • Runs on long lasting rechargeable batteries aqueous ozone, a sanitizer that kills many common pathogens found on hard, •...
  • Page 5: Troubleshooting

    Fill the Reservoir Sanitize Hard Non-Porous Surface Remove the fill cap to fill the reservoir with Hold the spray bottle 6 to 8 inches from the surface and spray evenly until 10 oz of clean, cold potable water. While wet. For 99.9% e ectiveness against common pathogens allow to stand holding the unit in the horizontal position, fill for 30 seconds.
  • Page 6: Service Network

    • One year replacement Exclusions: Certain O waterworks parts that are expendable by nature and that 6.2 DISPOSAL need to be replaced frequently may not be covered. O waterworks is not liable under these warranties for repairs or damages due to improper operation, Disassembly of the appliance must be performed by qualified...
  • Page 7 Distributed by: o3waterworks, LLC. 207 Byers Creek Road, Unit D Mooresville, NC 28117 Manufactured by: Enozo Technologies 300 Willow Street North Andover, MA 01845 EPA Est. No. 089373-MA-001 For support, contact: service@o3waterworks.com Model: SB-100HD...