Advertisement
Quick Links
Use new #10x2"
screws in these
two locations
WARNING!
Do not place
screw in
lower-inside
hole
Use new #10x2"
screws in these
two locations
WARNING!
Do not place
screw in
lower-inside
hole
PowerGrill Installation
Page 1 of 2
PowerGrill Installation
Page 1 of 2
BT100
Harley FLHT Fairing
1996 to Present
Kit Contents:
(2)
Speaker Adapters
(2)
Speaker Grills
(4)
#10x2" Screws
Notch on side of
adapter mates
with fairing
Re-use short Harley
screw here
BT100
Harley FLHT Fairing
1996 to Present
Kit Contents:
(2)
Speaker Adapters
(2)
Speaker Grills
(4)
#10x2" Screws
Notch on side of
adapter mates
with fairing
Re-use short Harley
screw here
Advertisement
Summary of Contents for Biketronics PowerGrill BT100
- Page 1 PowerGrill Installation BT100 Harley FLHT Fairing 1996 to Present Kit Contents: Speaker Adapters Use new #10x2” Speaker Grills screws in these #10x2” Screws two locations Notch on side of adapter mates with fairing WARNING! Do not place screw in Re-use short Harley lower-inside screw here hole...
- Page 2 Made in USA Adapters should be positioned so wide part is facing top of fairing. Biketronics recommends positioning your speaker so terminals are in the 12 o’clock position If you require assitance with your installation please contact us: Toll Free: 800-735-2419 International: 208-875-2645 E-Mail: info@biketronics.com...