Figure 22 - Device Setup -> Network -> Ipv4 - Crown RFBA Series User Manual

Network->IPV4
The IPV4 Setup page, F 22, allows the user to configure the Ethernet settings including the IP
IGURE
Address of the RFBA, the Subnet Mask, and the Default Gateway address. It also displays the MAC
address for the RFBA. The "Bandwidth Reduction" pull-down box is used to enable the Ethernet Nagle
algorithm which is used to packetize the Ethernet data. This function can be enabled for long-latency,
low-bandwidth applications such as remote sites with a satellite connection.
Figure 22 - Device Setup -> Network -> IPV4
Page 31
RFBA & RFBA Plus User Manual
Crown Broadcast