Related Manuals for Bolecki MSR Series
Summary of Contents for Bolecki MSR Series
- Page 1 User’s manual for „MSR” controller from version 1.30 and for MSR-W version 1.03. Please read this manual before starting operation of the controller.
- Page 2 MSR controller is designed for 6-point temperature measurement, ambient pressure measurement, positive differ- ence of pressures in two points and for heating element control. For each measuring point it is possible to define upper and lower alarm points, enable trouble signalization with given sensor, and give them user-friendly 8-digit names. SD card makes it possible to archive operation parameters at define interval and to upgrade the software.
-
Page 3: Electrical Connections
1. ELECTRICAL CONNECTIONS... -
Page 4: Supply Voltage
1.2 TEMPERATURE SENSORS ence to ambient pressure, therefore the “REF” port Six DS18B20 sensors and one A25 bolecki-brand- should be left open “to atmosphere”. The module is ed sensor should be connected to this equipment. -
Page 5: Use
could condensate on it. Planning longer module inac- is useful if number of parameters to be watched ex- tivity, being sure it was flooded (drops of condensate ceeds 6, and it is necessary to view many values in the tube), it is recommended to put the sensor in conveniently. -
Page 6: Menu Screens
2.2 MENU SCREENS sensor, touching the button here results in such Here you can set up the entire equipment oper- offset setting that current indication is zeroed (this ation. Moving from the mains screens to the menu process takes a few seconds and the value displayed is possible with a touch of the button, touching does not mean correction in hPa). - Page 7 ated. This operation is explained in the main screen may request to clear (format) the card before entering description (point 2.1). new logs. Handling the card is temporary suspended when the user touches some button. Status of the 2.2.3 SCREEN SPLIT LOCK switch, on the card casing, putting the card into Here you can select in which place of the first or read-only mode, is not taken into account.
-
Page 9: Software Upgrade
3. SOFTWARE UPGRADE 4. RISKS / INFORMATION FOR USERS Upgrading should be done always in the following • Battery is not supplied with the equipment. sequence: Please get familiar with the battery manual and its • Save the file with software to be installed in the safe operation. -
Page 10: Declaration Of Conformity
DECLARATION OF CONFORMITY Manufacturer data: Firma Bolecki Firma Bolecki seated in Kęty, declares with full ul. Żwirki i Wigury 24 responsibility that the MSR product together with the 32-650 Kety factory sensors and MSR-W operating part conforms Poland to the provisions of the following Directives EMC forum.bolecki.pl... -
Page 11: Table Of Contents
Contents 1. ELECTRICAL CONNECTIONS ............. . . 3 1.1 SUPPLY VOLTAGE . - Page 12 WARRANTY CARD Equipment name: msr Serial number................Sales date, stamp Warranty terms: • The manufacturer warrants correct operation of the equipment within a period of 24 months from the purchasing date. Warranty period for the MSR-P is 6 months from the purchasing date. •...
Need help?
Do you have a question about the MSR Series and is the answer not in the manual?
Questions and answers