Summary of Contents for ClipperCreek CS EVSE Pedestal
- Page 1 Innovative Infrastructure for Electric and Hybrid Vehicles CS EVSE PEDESTAL INSTALLATION GUIDE...
- Page 2 PLEASE NOTE: , Inc. This installation guide includes the latest information at the time of printing. ClipperCreek, Inc. reserves the right to make changes to this product without further notice. Changes or modifications to this product by other than an authorized service facility may void the product warranty.
-
Page 3: Table Of Contents
CS EVSE PEDESTAL INSTALLATION GUIDE ClipperCreek CONTENTS , Inc. IMPORTANT SAFETY INSTRUCTIONS ....................5 INSTALLATION REQUIREMENTS......................5 Required Equipment for a Single-Mount Pedestal with One EVSE (One per Pedestal) Required Equipment for a Dual-Mount Pedestal with Two EVSE (Two per Pedestal) TOOLS REQUIRED FOR ASSEMBLING THE CS PEDESTAL KIT............. - Page 4 CS EVSE PEDESTAL INSTALLATION GUIDE ClipperCreek , Inc. FIGURES 1. Pedestal Dimensions for Single-Mount and Dual-Mount Installations............7 2. Pedestal Base Dimensions ..........................7 3. Installation Cross-Section ..........................7 4. Proper Distance from the Curb ........................9 5. Bolt Pattern Template ...........................9 6. Pedestal Post Mounting by Pattern ......................10 7.
-
Page 5: Important Safety Instructions
ClipperCreek , Inc. IMPORTANT SAFETY INSTRUCTIONS ClipperCreek Electric Vehicle Supply Equipment (EVSE) is designed with the safety concerns of the end user as an utmost priority; however, the following safety precautions must be read and followed: • The EVSE and electrical wiring should be installed by a qualified electrician in accordance with local electrical codes and ordinances. -
Page 6: Tools Required For Assembling The Cs Pedestal Kit
CS EVSE PEDESTAL INSTALLATION GUIDE ClipperCreek , Inc. TOOLS REQUIRED FOR ASSEMBLING THE CS PEDESTAL The following tools are required for the installation and assembly of the pedestal components: T27 Torx Driver, in a variety of lengths for faster assembly. (Alternatively, a ratcheting driver •... -
Page 7: Pedestal Dimensions
CS EVSE PEDESTAL INSTALLATION GUIDE ClipperCreek , Inc. PEDESTAL DIMENSIONS Figure.1:.Pedestal.Dimensions.for.Single-Mount.and.Dual-Mount.Installations Figure 2: Pedestal Base Dimensions Figure.3:.Installation.Cross-Section Page 7... -
Page 8: Packing Lists
CS EVSE PEDESTAL INSTALLATION GUIDE ClipperCreek , Inc. PACKING LISTS 0300-00-015.Pedestal.Kit,.Standard.4.Foot,.Single.Mount Part Number QTY Description 0300-06-001 Pedestal Conduit Assembly, Standard 3/4” Fitting 1003-0014 Pedestal Metalwork, Cap with Rear Flange 1003-0019 Pedestal Metalwork, Back Bracket 1003-0023 Pedestal Metalwork, Base Cover 1003-0030... -
Page 9: Initial Pedestal Installation
CS EVSE PEDESTAL INSTALLATION GUIDE ClipperCreek , Inc. INITIAL PEDESTAL INSTALLATION 1..Concrete.Pad.Requirements 2..Anchor.Bolt.Placement The location, dimensions, and composition of the A minimum of four (4) anchor bolts must be concrete pad underlying the pedestal should always embedded in the concrete pad for the purposes of adhere to local building codes. -
Page 10: Mounting The Pedestal Post
CS EVSE PEDESTAL INSTALLATION GUIDE INITIAL PEDESTAL INSTALLATION (continued) ClipperCreek , Inc. 3..Mounting.the.Pedestal.Post 4..Install.the.Pedestal.Base.Cover Once the concrete pad with anchor bolts has been A two-piece pedestal base cover set is included in the prepared and the service conductors have been pulled pedestal kit. -
Page 11: Install The Conduit Assembly
CS EVSE PEDESTAL INSTALLATION GUIDE INITIAL PEDESTAL INSTALLATION (continued) ClipperCreek , Inc. 6..Install.the.Conduit.Assembly Figure.9:.Standard.3/4”.Conduit.Assembly The service conductors are routed through the side of the pedestal and into the back of the EVSE via an external conduit assembly. NOTE:.For.a.Dual-Mount. installation, these instructions must be repeated for the.opposite.side. - Page 12 CS EVSE PEDESTAL INSTALLATION GUIDE INITIAL PEDESTAL INSTALLATION (continued) ClipperCreek , Inc. For.the.Optional.1”.Conduit.Assembly: Figure.10:.Optional.1”.Conduit.Assembly Some installations may require a conduit larger than the standard ¾” assembly. For this purpose, an optional 1” conduit assembly may be requested. Follow these instructions and refer to Figure.10.to install the optional 1”...
-
Page 13: Re-Install The Pedestal Post Cap
CS EVSE PEDESTAL INSTALLATION GUIDE INITIAL PEDESTAL INSTALLATION (continued) ClipperCreek , Inc. Figure.11:.The.Pedestal.Post.Cap 7..Re-install.the.Pedestal.Post.Cap A pedestal cap is provided to cover the opening to protect the conductors and inner pedestal from the The standard post cap has elements. Install the appropriate pedestal cap for a a.flange.on.the.rear.of.the. -
Page 14: Install The Cs Evse Mounting Plate(S)
CS EVSE PEDESTAL INSTALLATION GUIDE ClipperCreek INITIAL PEDESTAL INSTALLATION (continued) , Inc. 8..Install.the.CS.EVSE.Mounting.Plate(s) Install the Single CS EVSE Back Bracket A bracket with threadeded inserts is included with the An EVSE mounting plate is affixed to the front of pedestal kit to make the installation more rigid and to the pedestal post to provide flat and rigid base on provide threadeded inserts for mounting the EVSE. -
Page 15: Mounting.the.evse(S)
CS EVSE PEDESTAL INSTALLATION GUIDE MOUNTING THE EVSE(s) ClipperCreek , Inc. 11.. 10.. Mounting a Single EVSE to the Pedestal EVSE Knockout Removal With the mounting plate and back bracket in place, • To open the EVSE door, remove the two door... -
Page 16: Mounting Two Evse To The Pedestal
CS EVSE PEDESTAL INSTALLATION GUIDE ClipperCreek MOUNTING THE EVSE(s) and FINAL PEDESTAL INSTALLATION , Inc. 12.. 13..Seal.the.Conduit.and.Enclosure Mounting Two EVSE to the Pedestal For an installation with two EVSE affixed to the It is necessary to ensure a good environmental seal... -
Page 17: Wiring The Conductors To The Evse
CS EVSE PEDESTAL INSTALLATION GUIDE FINAL PEDESTAL INSTALLATION ClipperCreek , Inc. 14..Wiring.the.Conductors.to.the.EVSE Figure.19:.Install the CS Series Connector Holster(s) The three service conductors must be wired to the EVSE internal chassis and contactor. • Strip the end of the ground conductor and insert the exposed wire into the Service Ground Terminal Block. -
Page 18: Customer Support
CS EVSE PEDESTAL INSTALLATION GUIDE CUSTOMER SUPPORT ClipperCreek , Inc. Call your Service Representative at any time, 24 hours a day, at the number below. PLEASE HAVE THE MODEL.NUMBER.AND.SERIAL.NUMBER.AVAILABLE.WHEN.YOU.CALL. These can be found on the side of the enclosure. If your call is made after business hours or on weekends, please leave your name, telephone number, the unit’s serial number, and a brief description of the problem. -
Page 19: Warranty Information
ClipperCreek or an authorized ClipperCreek representative or dealer has been advised of the possibility of such damages or of any claim by any other party. Some states do not allow the exclusion or limitation of incidental damages for some products, so the above limitation or exclusion may not apply to you. - Page 20 11850 Kemper Rd., Suite E Auburn, CA 95603 www.ClipperCreek.com (877) 694-4194...
Need help?
Do you have a question about the CS EVSE Pedestal and is the answer not in the manual?
Questions and answers