Advertisement
Assembly & Installation Instructions:
Single Pole Mount Adaptor CONF-ADPT-SPM-S
Parts Included
A
Articulating Arm Bolt
M8 x 80 mm
Qty: 1
Required Parts Sold Separately
Conform Monitor Arm.
Selected Pole Base option with mounting hardware.
Do not use on hollow core tables.
Do not rotate or suspend arm (s) beyond table surface.
Do not exceed 48 lb.
1
Attach the Single Pole Mount Adaptor to Selected Pole Option
a
Place the Single Pole Mount Adaptor on
selected pole option, at your desired
monitor height.
b
Tighten the clamp screw on the Single
Pole Mount Adaptor (C) with 5 mm Allen
Wrench, included with base, to secure
Adaptor to Pole.
1 of 2
B
Articulating Arm Spacer
Qty: 1
C
Single Pole Mount Adaptor
(includes Spacer for Static Arm)
Qty: 1
Tools Required
Phillips head screwdriver, 2.5 mm Allen Wrench, 5 mm
Allen Wrench.
C
a
clamp screw
14" Pole shown
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
b
Advertisement
Table of Contents
Summary of Contents for Workrite Ergonomics CONF-ADPT-SPM-S
- Page 1 Assembly & Installation Instructions: Single Pole Mount Adaptor CONF-ADPT-SPM-S Parts Included Articulating Arm Spacer Articulating Arm Bolt Single Pole Mount Adaptor Qty: 1 M8 x 80 mm (includes Spacer for Static Arm) Qty: 1 Qty: 1 Required Parts Sold Separately Tools Required Conform Monitor Arm.
- Page 2 Align peg in arm with cutout in spacer pre-installed set screw Pin with Pin with Static Articulating Arm Spacer Arm Spacer from 14" Pole shown Articulating Arm mount Static Arm mount 2 of 2 Workrite Ergonomics | 800.959.9675 www.workriteergo.com 1500263 Rev A...
Need help?
Do you have a question about the CONF-ADPT-SPM-S and is the answer not in the manual?
Questions and answers