EXO2 HeatBuddy Jr User Instructions

ELCOME

Your high performance, multi-purpose HeatBuddy Jr. has been designed to provide you with years of

warmth and beneficial heat where and when you need it.

This novel heating system is based on FabRoc™, a revolutionary material invented for use in the aerospace

industry which is extremely efficient in generating heat from a low voltage source. A FabRoc™ panel is

encapsulated into the EXO2 proprietary, weatherproof bonding film along with a layer of 3M Thinsulate®

insulation on the bottom to help direct the heat towards the target.

The HeatBuddy Jr. can be powered by your vehicle's 12 volt accessory power outlet (with the supplied

EXO2 Accessory Outlet Power Cable and P25S13 Adapter) or via the optional EXO2 12 volt or 15 volt, multi-

level rechargeable Lithium-Ion batteries. With the multi-level batteries you can dial in your desired heat up

to 140°F which will provide deep, Far Infrared Ray (FIR) heat or 'Healthy Heat".

RODUCT

ONTENTS

Encapsulated HeatBuddy Jr. Pad made with FabRoc™ Heat Technology by EXO2

Integrated 3M Thinsulate® Insulation

Cordura® or Nomex™ Cover with Velcro™ Enclosure

12 Volt Accessory Outlet Power Cable (and P25S13 Adapter)

Product User Instructions

12 Volt or 15 Volt Rechargeable Lithium-ion Batteries and Charger (Optional Accessories)

HeatBuddy Jr.

USER INSTRUCTIONS

Table of Contents

Need help?

Do you have a question about the HeatBuddy Jr and is the answer not in the manual?

Page 1 The HeatBuddy Jr. can be powered by your vehicle’s 12 volt accessory power outlet (with the supplied EXO2 Accessory Outlet Power Cable and P25S13 Adapter) or via the optional EXO2 12 volt or 15 volt, multi- level rechargeable Lithium-Ion batteries. With the multi-level batteries you can dial in your desired heat up to 140°F which will provide deep, Far Infrared Ray (FIR) heat or ‘Healthy Heat”.
Page 2 Accessory Outlet Power Cable and adapter. (The P25S13 Adapter is required only when using the 12 Volt Accessory Outlet Power Cable.) Merely plug the HeatBuddy Jr. in and sit on it, lean up against it, wrap around you, etc. to immediately enjoy and benefit from the unique heat produced only by FabRoc™ Heat Technology by EXO2.
Page 3 LEANING NSTRUCTIONS Remove the internal HeatBuddy Jr. pad from the outer cover and wash the cover by hand or in a washing machine. In the event that the HeatBuddy Jr. pad becomes soiled, wipe clean with a warm damp cloth.