Do you have a question about the PolyGard 2 DT6 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for Intec PolyGard 2 DT6
Page 1
(ref. optional remote sensor DR6) Digital Gas Transmitters Serial No. SB-03 User Manual Version February 2020 en March 06, 2020 – Revision INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com...
"Housing dimensions" Fig. 5 so that the Sensor Cartridge is always directed vertically to the ground. • Close the cover. INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com...
• Service Tool STL6 or • DPT6 incl. EasyConfig Software and USB/RS-485 communication set: • Calibration: See SC2 user manual. INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com...
Only one SC per gas type must be connected to the same DT6 Basic Sensor Board. Two SC2 sensor heads of the same gas group (Freons) must not be connected. INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com...
With a zero reading> 10% of measuring range during the zero calibration, zero calibration is not possible. INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com...
LED when an internal switching threshold is reached. With this test, the complete function chain “Sensor Element > Sensor Cartridge> Local Bus> BSB> Field Bus> GC Controller” is tested. INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com...
When performing the maintenance, you have to do the calibration and the functional test in addition to the inspection. See section 4. INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com...
*If there are changes on the housing it has to be re-evaluated All specifications were collected under optimal test conditions. We confirm compliance with the minimum requirements of the applicable standard. INTEC Controls | 12700 Stowe Drive, Suite 100, Poway, CA 92064 | Ph: (858) 578.7887 & (888) GO.INTEC | inteccontrols.com...
Need help?
Do you have a question about the PolyGard 2 DT6 and is the answer not in the manual?
Questions and answers